Introduction

●

For documentation on data-router functionality, refer to the following documents:

✔

CLI Reference Guide

✔

SNMP Reference Guide

✔

MediaPack 5xx Voice Gateway Basic Configuration

✔

M5G-EA and M5G-EA-G Cellular Module Hardware Installation and Configuration Guide

✔

IP Networking CLI Configuration Guide Ver. 7.2

✔

Layer-2 Bridging CLI Configuration Guide Ver. 7.2

✔

LAN-WAN Access CLI Configuration Guide Ver. 7.2

✔

Security Setup CLI Configuration Guide Ver. 7.2

✔

Mediant 500Li MSBR Simplifying Network CLI Configuration Guide Ver. 7.2

✔

Simplifying Network CLI Configuration Note Ver. 7.2

✔

Basic System Setup CLI Configuration Guide Ver. 7.2

✔

Troubleshooting Configuration Note Ver. 7.2

✔

Upgrading MSBR Firmware from Ver. 6.8 to Ver. 7.2 Configuration Note

✔

Configuring Wireless Access Configuration Guide

●

Web-based management for data-router functionality is not supported. Instead, use the device's CLI to configure data-router functionality. It's recommended that you also use CLI scripting to configure all other functionality as well (i.e., VoIP and System).