Configuring Subscription to UA Profile Events

You can configure the device to subscribe to UA-Profile events with a UA-Profile server. The device initiates the subscription process by sending a SIP SUBSCRIBE request containing an Event header that specifies the desired app or service. The following shows an example of a SUBSCRIBE message for UA-Profile subscription to a service called "myapp":

Event: ua-profile;profile-type=application;appids="myapp"

➢

To configure UA-Profile subscription:

1.

Open the Supplementary Services Settings page (Setup menu > Signaling & Media tab > Gateway folder > DTMF & Supplementary subfolder > Supplementary Services Settings).

2.

From the 'Subscribe to UaProfile' drop-down list, select Yes.

3.

In the 'UaProfile Server IP Address' field, type the address (IP address or FQDN) of the UA-Profile server.

4.

In the 'UaProfile Subscribe Expiration Time' field, type the duration (in seconds) of the validity of the subscribed service after which it expires. When it expires, the device sends another SUBSCRIBE request.

5.

From the 'UaProfile Server Transport Type' drop-down list, select the transport protocol for sending the SIP SUBSCRIBE requests to the UA-Profile server.

6.

In the 'UaProfile IP Group ID' field, type the ID of the IP Group configured to represent the UA-Profile server.

7.

Click Apply.