Notice

Information contained in this document is believed to be accurate and reliable at the time of publishing. However, due to ongoing product improvements and revisions, AudioCodes cannot guarantee accuracy of published material after the Date Published nor can it accept responsibility for errors or omissions. Updates to this document can be downloaded from https://www.audiocodes.com/library/technical-documents.

This document is subject to change without notice.

Date Published: March-02-2025

WEEE EU Directive

Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed of with unsorted waste. Please contact your local recycling authority for disposal of this product.

Security Vulnerabilities

All security vulnerabilities should be reported to vulnerability@audiocodes.com.

Customer Support

Customer technical support and services are provided by AudioCodes or by an authorized AudioCodes Service Partner. For more information on how to buy technical support for AudioCodes products and for contact information, please visit our website at https://www.audiocodes.com/services-support/maintenance-and-support.

Documentation Feedback

AudioCodes continually strives to produce high quality documentation. If you have any comments (suggestions or errors) regarding this document, please fill out the Documentation Feedback form on our website at https://online.audiocodes.com/documentation-feedback.

Stay in the Loop with AudioCodes

Twitter Facebook LinkedIn YouTube Blog

Notes and Warnings

The device is an indoor unit and therefore, must be installed only INDOORS.

The scope of this document does not fully cover security aspects for deploying the device in your environment. Security measures should be done in accordance with your organization’s security policies. For basic security guidelines, refer to the Recommended Security Guidelines document.

Configuration and usage of this AudioCodes device must be in accordance with your local security regulations, telephony regulations, or any other related regulations.

For MP-508 FXO interfaces:

DC resistance 311Ω.
the terminal may not be able to be used normally, depending on the usage environment.

Throughout this manual, unless otherwise specified, the term device refers to your AudioCodes product.

Before configuring the device, ensure that it is installed correctly as instructed in the Hardware Installation Manual.

OPEN SOURCE SOFTWARE. Portions of the software may be open source software and may be governed by and distributed under open source licenses, such as the terms of the GNU General Public License (GPL), the terms of the Lesser General Public License (LGPL), BSD and LDAP. If any open source software is provided in object code, and its accompanying license requires that it be provided in source code as well, Buyer may receive such source code by contacting AudioCodes.

Some of the features described in this document are licensed features and are available only if the installed License Key contains these features.
This device includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/).
This device includes cryptographic software written by Eric Young (eay@cryptsoft.com).
Web-based management for Data-Routing functionality is not supported; use CLI to configure this functionality.
It is recommended to use CLI scripting to configure all functionality -- VoIP, system and Data-Routing -- through the CLI.

Related Documentation

Document Name

Release Notes

MSBR Series Release Notes

Hardware / Installation Manuals

MediaPack 504-508 (MP-5xx) Hardware Installation Manual

MediaPack 504-508 (MP-5xx) Voice Gateway Quick Guide

MediaPack 5xx Voice Gateway Basic Configuration

Configuration Guides

Complementary Guides

MSBR CLI Reference Guide

MSBR SNMP Alarms Guide

MSBR SNMP Reference Guide

IP-based Voice Mail Configuration Note

TR-069 CWMP for Mediant MSBR Reference Guide

Recommended Security Guidelines

SIP Message Manipulation Syntax Reference Guide

Utility Guides

INI Viewer & Editor Utility User's Guide

CLI Wizard User's Guide

Document Revision Record

LTRT

Description

14205

Initial document release.

14208

Updated to Ver. 7.2 (M11)
Updated sections: Zero Configuration (.ini file); Configuring WebSocket Tunnel with OVOC (main-vrf instead of WSTunInterfaceName); MAC Address Placeholder in Configuration File Name (LAN MAC); Configuring WebRTC (Enforce Media Order); Saving and Loading the Configuration Package File (CLI Startup Script); Notations and Priority Matching for Dial Plan Patterns (wildcards); DHCP-based Provisioning (mac); Configuring Management User Accounts (plain text passwords for shared settings); Configuring SNMP V3 Users (plain text passwords for shared settings); Configuring Table ini File Parameters ($$ removed)
Updated parameters: CmpFileURL (online); AutoCmpFileUrl (online); IPGroup_SIPConnect (description); EnableSIPRemoteReset (description); SystemLogSize (range and default); SBCEnforceMediaOrder (Web parameter added); IPGroup_AuthenticationMode (description); WebUsers_SessionLimit (description); HostName (CLI path); ProxyIPListRefreshTime; Account_Password (note re question mark); InboundMediaLatchMode (description strict);

14209

Updated to Ver. 7.2 (M12)
New sections: Configuring Secondary WAN Interface; WAN MAC Address Placeholder for Auto-Update File URLs
Updated sections: Enabling SSH with RSA or ECDSA Public Key for CLI (ECDSA); Generating Private Keys for TLS Contexts (ECDSA); Viewing Device Information (IMEI); Configuring a Hostname for Web Interface (description / parameter); Current Network Configuration (web path changed); Viewing Ethernet Port Information (page removed - replaced by Network View page); OAuth 2.0 Based SIP Message Authentication (path updated); Configuring SIP Message Manipulation (max chars for condition).
New parameters: TR069HTTPPortRestriction; FlashKeyToggleToSecondary; FlashKeyToggleToPrimary; FlashKeyCallTransfer; FlashKeyConference; FlashKeyByeAndToggle; FlashKeyByeToSecondary; SecondaryDigitMapping; DigitMapping (Tel Profile)
Updated parameters: AupdHttpUserAgent (WANMAC placeholder); EnhancedFXSLineCurrent (description updated); EnableTrapezoidRing (description updated); DNSrebindingProtectionEnabled (removed); HostHeaderProtection (removed); WebHostname (web name renamed); FakeRetryAfter (corresponding CLI); LDAPAuthFilter ($ mandatory); BellModemTransportType (def); DSPVersionTemplateNumber.
Miscellaneous: FXO support for MP-508.

14210

Updated to Ver. 7.2 (M13)
New section: Viewing Backup Group Status
Updated sections: OAuth2-based User Authentication (removed); Configuring SIP Message Manipulation (max. chars for condition); Configuring SIP Response Codes for Alternative Routing Reasons (max. 4 proxies); Enabling LDAP-based User Login Authentication (note re both LDAP and RADIUS); RADIUS-based User Login Authentication (note re both LDAP and RADIUS).
New parameters: EnablePulseDialDetection (also for FXS); TelProfile_InternalLine; AupdMaxTransferTime
Updated parameters: IsProxyHotSwap (max. 4 proxies for alt); Prefix2ExtLine (description); FlashKeyToggleToSecondary; FlashKeyToggleToPrimary; FlashKeyCallTransfer; FlashKeyConference; FlashKeyByeAndToggle; FlashKeyByeToSecondary;

14211

Typo (max. LDAP Server Groups)

14212

FXO added.

14213

Updated to Ver. 7.2 (M14)
New sections: Configuring Subscription to UA Profile Events; Enabling the SNMP View-based Access Control Model; Configuring SNMP Access Groups; Configuring SNMP View Tree Family
Updated sections: Configuring SNMP Community Strings (table design); Configuring SNMPv3 Users (Access Group); Configuring SNMP Trap Destinations (table design); Configuring SNMP Trusted Managers (table design)
New parameters: EnableUaProfileSubscription; EnableUaProfileSubscription; UaProfileServerIP; UAProfileSubscribeIPGroupID; UaProfileServerTransportType; VacmAccessGroups; VacmViewTreeFamily; EnableSnmpAdvancedMode; SNMPCommunityStrings; SSHKexAlgorithmsString; SSHCiphersString; SSHMACsString
Updated parameters: SNMPTrapManagerHostName (obsolete)