SNMP Performance Monitoring MIBs
This section describes the Performance Monitoring SNMP MIBs.
|
●
|
The tables in this section use check marks "√" and crosses "x" to indicate support for the specific MIB property: |
|
✔
|
"Int": measured interval |
|
✔
|
"Val": value of gauge or counter |
|
✔
|
"Min": minimum gauge value |
|
✔
|
"Max": maximum gauge value |
|
✔
|
"Avg": average within the interval |
|
✔
|
"TbLT": percentage of interval time that value was below low threshold |
|
✔
|
"TbT": percentage of interval time that value was between low and high thresholds |
|
✔
|
"TaHT": percentage of interval time that value was above high threshold |
|
✔
|
"HT": configured or default high threshold |
|
✔
|
"LT": configured or default low threshold |
|
●
|
For performance monitoring MIBs that count attempted calls (e.g., acPMSIPAttemptedCallsTable), you can configure the stage of the call (start or termination) to include in the count. This is done using the [AttemptedCallCountOnStart] parameter. |