hw

This command configures hardware-related settings.

Syntax

(config-system)# hw
(hw)# 

Command	Description
dual-powersupply-supported {no|yes}	Enables the device to send an SNMP alarm (acPowerSupplyAlarm) for one or both Power Supply modules if a module is removed from the chassis or not operating correctly (failure).

Command Mode

Privileged User

Note

The command is applicable only to MP-1288 , Mediant 800, and Mediant 9000.

Example

This example enables sending an alarm if a Power Supply module is removed or fails.

(config-system)# hw
(hw)# dual-powersupply-supported yes