Open Solution Network (OSN) Parameters
The OSN server parameters are described in the table below.
OSN Parameters
|
Parameter |
Description |
||||||
|---|---|---|---|---|---|---|---|
|
'OSN Native VLAN ID' configure network > interface osn > native-vlan <id> [OSNAccessVlan] |
Defines the OSN Native VLAN ID. The valid value is 0 to 4000. The default is 0. When configured to 0, the OSN uses the device's OAMP VLAN ID. When configured to any other value, it specifies a VLAN ID configured in the Ethernet Devices table and which is assigned to a Media and/or Control application in the IP Interfaces table. |
||||||
|
'Block OSN Port' configure network > interface osn > shutdown [OSNBlockPort] |
Enables or disables the Ethernet port of the internal switch that interfaces with the OSN.
|
||||||
|
configure network > network-settings > osn-internal-vlan [OSNInternalVLAN] |
Enables a single management platform when the device is deployed as a Survivable Branch Appliance (SBA) in a Microsoft Skype for Business environment. It allows configuration and monitoring of the Gateway/SBC device through the SBA Management Interface.
For more information, refer to the SBA Installation and Maintenance Manual. |