HTTP-based Services

Enables QoS-based routing by the routing server. The device collects QoS metrics (media and signaling) and sends them to the routing server.

For more information, see Configuring QoS-Based Routing by Routing Server.

Defines the rate (in sec) at which the device sends QoS reports to the routing server.

The valid range is 15-3600. The default is 60.

For more information, see Configuring QoS-Based Routing by Routing Server.

Enables the reporting of the Device's topology status (using the REST TopologyStatus API command) to remote HTTP hosts.

For more information, see Configuring Remote Web Services

Defines the maximum buffer size (in bytes) for HTTP responses received from Remote Web Services (see Configuring Remote Web Services). These are received in reply to the Device's HTTP requests (REST API).

The valid value range is 5,000 to 8,500. The default is 8,500.

Note: For the parameter to take effect, a Device restart is required.

Enables the synchronization of the Device's registration database (using the REST registrationStatus API command) with remote HTTP hosts.

For more information, see Configuring Remote Web Services

Enables the Device to send monitoring reports to a remote monitoring server when the Device is located behind NAT.

Defines the time interval (in seconds) between each remote monitoring report that is sent to the monitoring server.

The valid value is 30 to 65535. The default is 300.

Enables the Device to send a remote monitoring report of its status to the monitoring server.

Enables the Device to send a remote monitoring report of currently active alarms to the monitoring server.

Enables the Device to send a remote monitoring report of performance monitoring statistics to the monitoring server.