Notice
Information contained in this document is believed to be accurate and reliable at the time of printing. However, due to ongoing product improvements and revisions, AudioCodes cannot guarantee accuracy of printed material after the Date Published nor can it accept responsibility for errors or omissions.
This document is subject to change without notice.
Date Published: September-18-2024
WEEE EU Directive
Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed of with unsorted waste. Please contact your local recycling authority for disposal of this product.
Security Vulnerabilities
All security vulnerabilities should be reported to vulnerability@audiocodes.com.
Customer Support
Customer technical support and services are provided by AudioCodes or by an authorized AudioCodes Service Partner. For more information on how to buy technical support for AudioCodes products and for contact information, please visit our website at https://www.audiocodes.com/services-support/maintenance-and-support.
Documentation Feedback
AudioCodes continually strives to produce high quality documentation. If you have any comments (suggestions or errors) regarding this document, please fill out the Documentation Feedback form on our website at https://online.audiocodes.com/documentation-feedback.
Stay in the Loop with AudioCodes
Notes and Warnings
Read and adhere to all warning statements in this document before installing the device.
This device is considered as IPX0 non-water ingress protected and therefore, must be installed only indoors.
Ethernet port interface cabling must be shielded and routed only indoors (must not exit the building).
For AC powered models, use only the AC power cords supplied with the device to connect to the power source.
Caution Electrical Shock: Do not open or disassemble this device. The device carries high voltage and contact with internal components may expose you to electrical shock and bodily harm.
The device must be installed and serviced only by qualified service personnel.
Disconnect the device from the mains and Telephone Network Voltage (TNV) before servicing.
The device must be installed only in a restricted access location that is compliant with ETS 300 253 guidelines where equipotential bonding has been implemented.
Installation of this device must be in a weather protected location of maximum ambient temperature of 40°C.
Related Documentation
|
Document Name |
|---|
Document Revision Record
|
LTRT |
Description |
|---|---|
|
89808 |
Initial document release. |
|
89809 |
Device replacement. |
|
89810 |
64 T1/E1s; DC power. |
|
89811 |
Miscellaneous (drawings and text); caution for lifting into chassis. |
|
89812 |
DC power connection options (note). |
|
89813 |
68-Pin D-Sub pinouts. |
|
89814 |
PSTN Fallback added. |
|
89815 |
Patch panels for connecting T1/E1 trunks when using 68-Pin D-Sub. |