Notice
Information contained in this document is believed to be accurate and reliable at the time of printing. However, due to ongoing product improvements and revisions, AudioCodes cannot guarantee accuracy of printed material after the Date Published nor can it accept responsibility for errors or omissions. Updates to this document can be downloaded from https://www.audiocodes.com/library/technical-documents.
This document is subject to change without notice.
Date Published: September-10-2024
WEEE EU Directive
Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed of with unsorted waste. Please contact your local recycling authority for disposal of this product.
Security Vulnerabilities
All security vulnerabilities should be reported to vulnerability@audiocodes.com.
Customer Support
Customer technical support and services are provided by AudioCodes or by an authorized AudioCodes Service Partner. For more information on how to buy technical support for AudioCodes products and for contact information, please visit our website at https://www.audiocodes.com/services-support/maintenance-and-support.
Documentation Feedback
AudioCodes continually strives to produce high quality documentation. If you have any comments (suggestions or errors) regarding this document, please fill out the Documentation Feedback form on our website at https://online.audiocodes.com/documentation-feedback.
Stay in the Loop with AudioCodes
Notes and Warnings
The device is an indoor unit and therefore, must be installed only INDOORS.
Configuration and usage of this device must be in accordance with your local security regulations, telephony regulations, or any other related regulations.
The scope of this document doesn't fully cover security aspects for deploying the device in your environment. Security measures should be done in accordance with your organization’s security policies. For basic security guidelines, refer to the Recommended Security Guidelines document.
Throughout this manual, unless otherwise specified, the term device refers to your AudioCodes product.
Before configuring the device, ensure that it is installed correctly as instructed in the Hardware Installation Manual.
OPEN SOURCE SOFTWARE. Portions of the software may be open source software and may be governed by and distributed under open source licenses, such as the terms of the GNU General Public License (GPL), the terms of the Lesser General Public License (LGPL), BSD and LDAP. If any open source software is provided in object code, and its accompanying license requires that it be provided in source code as well, the Buyer may receive such source code by contacting AudioCodes.
|
●
|
This device includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/). |
|
●
|
This device includes cryptographic software written by Eric Young (eay@cryptsoft.com). |
|
●
|
Some of the features described in this document are licensed features and are available only if the installed License Key contains these features. |
Related Documentation
Document Revision Record
|
|
|
|
89830
|
Initial document release for Ver. 7.4.
|
|
89831
|
Typos
|
|
89832
|
|
■
|
Updated sections: Notations and Priority Matching for Dial Plan Patterns; G.711 Fax and Modem Transport Mode (typo gpmd); Configuring Pre-Parsing Manipulation Rules (max rules) |
|
■
|
New parameters: SBCTerminateOPTIONS |
|
■
|
Updated parameters: SBCAlertTimeout (description) |
|
■
|
Miscellaneous: Cross-references fixed |
|
|
89833
|
|
■
|
Updated to Ver. 7.40A.100.233 |
|
■
|
Updated sections: CDR Field Description (Tenant ID); Filtering IP Network Traces using Wireshark-Like Expressions (example); Notations and Priority Matching for Dial Plan Patterns |
|
■
|
New parameters: SipSessionExpiresObserverMode |
|
■
|
Updated parameters: UseRandomUser (new value); AUPDResetURLOnWebConfig; sbc-no-alert-timeout (typo) |
|
|
89834
|
|
■
|
Updated to Ver. 7.40A.200.005 |
|
■
|
New sections: Configuring Secondary Syslog Servers; Downloading TLS-Related Files for a Specific TLS Context; Downloading TLS-Related Files for all TLS ContextsConfiguring OAuth Authentication; Authenticating SIP Messages using Device's OAuth2.0 Server with Azure AD; Configuring OAuth 2.0 Servers; Configuring OAuth Servers for User Login Authentication; Enabling OAuth-based User Login Authentication; Configuring a Hostname for Web Interface; Deleting All Users in Local Users Table; Viewing Active Web Interface and CLI Users; Masking PII in CDRs; Masking Digits in Syslog Messages; Masking PII from Syslog Files using PII Log Scrubber Tool |
|
■
|
Updated sections: Configuring Syslog Message Severity Level (removed); Call Detail Records (syslog severity); Using Dial Plan Tags for Routing Destinations (CSR); Using Dial Plan Tags for Call Setup Rules; Viewing SBC Registered Users (MOS); Configuring Registered User Voice Quality (MOS); OVOC-Managed SBC Capacity Licenses (floating, flex, fixed); Computer Requirements (Edge); Third-Party Routing Server or ARM (no-answer timeout); Saving and Loading a Configuration Package File (SNMP backup); Configuring the Primary Syslog Server Address; Viewing Device Status on Monitor Page (GW statistics); CDR Field Description (new termination reason); Viewing Registration Status (server address); Configuring WebSocket Tunnel with OVOC (status) |
|
■
|
New parameters: EnableFloatingLicense; AllocationProfile; AllocationRegisteredUsers; AllocationMediaSessions; AllocationSignalingSessions; LimitRegisteredUsers; LimitMediaSessions; LimitSignalingSessions; LimitTranscodingSessions; SyslogServers; SyslogProtocol; SyslogTLSContext; QOESettings_FilterReports; OAuthServers; LoginOAuthServers; OAuthWebLogin; WebHostname; AllowRemoveLocalUsersTable; AccountRegistrarAvoidanceTime; PIIMaskDigits; PIIMaskPrivateInfoInCDRs; PIINumberOfUnmaskedChars; PIIUnmaskedCharsLocation |
|
■
|
Updated parameters: UpstreamHost (Max Connections removed); UpstreamGroup (Max Connections added); IPGroup_SourceUriInput (note); CDRHistoryPrivacy (removed); SIPInterface_UDPPort (port uniqueness); SIPInterface_TCPPort (port uniqueness); SIPInterface_TLSPort (port uniqueness); IPOutboundManipulation_SrcTags (max. tags); IPOutboundManipulation_DestTags (max. tags); IP2IPRouting_SrcTags (max. tags); IP2IPRouting_DestTags (max. tags); LoggingFilters_LogDestination (Call Flow Server renamed OVOC); LoggingFilters_CaptureType (Call Flow renamed SIP Ladder, CDR Only renamed CDR, new IP Group Tag); SSHKexAlgorithmsString (diffie-hellman-group14-sha1); SSHCiphersString (aes256-ctr, aes256-cbc); HTTPSOnly (value 2); SNMPUsers_PrivProtocol (AES-192, AES-256);
Account_RegistrarSearchMode (new value 2) |
|
|
89835
|
|
■
|
Updated to Ver. 7.40A.100.366 |
|
■
|
Updated sections: Establishing a CLI Session (failed login); Configuring Telnet for CLI (default); Configuring Management User Accounts (EnforcePasswordComplexity for CLI) |
|
■
|
New parameters: IpProfile_SBCAllowOnlyNegotiatedPT; SIPServerDigestAlgorithm |
|
■
|
Updated parameters: IPProfile_LocalRingbackTone (range); IPProfile_LocalHeldTone (range); TelnetServerEnable (default); EnableSIPREC (removed) |
|
|
89836
|
|
■
|
Updated to Ver. 7.40A.250.001 |
|
■
|
New sections: Configuring SNI-to-TLS Mapping; Prerequisites for WebRTC; On-Demand SIPRec using REST |
|
■
|
Updated sections: Configuring OAuth 2.0 Servers (field name typos); Viewing Voice Channel Information; OVOC-Managed Capacity Licenses (SIPRec / WebRTC); Configuring SIP Recording Rules (REST); Masking PII in CDRs; Configuring Registration Accounts (status); On-Demand SIPRec using SIP INFO Message (pause/resume); Configuring Dial Plans (ReferredByTags); Direct Media Calls (X-AC-Action: direct-media) |
|
■
|
New parameters: SNI2TLSMapping; AuthenticatedMessageHandling; UdpPortSpacing; IP2IPRouting_ModifiedDestUserName; AllocationWebRTCSessions; AllocationSIPRecStreams; LimitWebRTCSessions; LimitSIPRecStreams; SIPRecRouting_RecordingTrigger; SIPRecRouting_SRSRole; PIIMaskPrivateInfoForOVOC; PIIMaskHost; IPGroup_ValidateSourceIP; EnableDNSEnvelop |
|
■
|
Updated parameters: SyslogLogLevel (typo); DialPlanRule_Tag (valid chars); EnableMediaSecurity (WebRTC); IPGroup_AuthenticationMode (3) |
|
|
89837
|
|
■
|
Updated to Ver. 7.40A.250.255 |
|
■
|
New sections: Configuring Syslog Message Severity Level; |
|
■
|
Updated sections: Configuring Classification Rules (validate IP); Downloading and Uploading ini Configuration/CLI Script/ Configuration Package File (buttons renamed); Configuring SNMP Community Strings (pwd complexity); Reporting Management User Activities (file upload/download); Configuring Management User Accounts (user logged out upon edit / old passwords); Restoring Factory Defaults through CLI (clear TLS files); Viewing Device Information (BID) |
|
■
|
Updated parameters: BrokenConnectionEventTimeout (def); Prefix2ExtLine (values); PstnPrefix_SourcePrefix (typo); ProxySet_IsProxyHotSwap (typo in enable); AudioCoders_Sce (value 2)]; AutoUpdatePredefinedTime; AutoUpdateFreqencySeconds; Account_ContactUser (note added); RFC2833RxPayloadType (CLI); RFC2833RxPayloadType (CLI); EnforcePasswordComplexity (SNMPv2 community strings); SyslogServers_SeverityLevel (value names); |
|
■
|
New parameters: SyslogLogLevel; CheckPasswordHistory; AbortRetriesOnICMPError. |
|
|
89838
|
|
■
|
Updated to Ver. 7.40A.260.007 |
|
■
|
New sections: Detection of Weak Passwords; Configuring the Weak Passwords List |
|
■
|
Updated sections: Configuring RTP Base UDP Port; Configuring Dual Registration for SIP Entity (typo IP); Viewing Tel-to-IP and IP-to-Tel Call Counters (removed); Computer Requirements; TrunkGroup_TrunkGroupNum (values); Customizing SNMP Alarm Severity (EntityID); CDR Field Description ('Released From IP'); SBC Configuration Wizard (screens); Viewing Device Status on Monitor Page ('Power Type') |
|
■
|
New parameters: IPGroup_DedicatedConnectionMode; WeakPasswordsList; WeakPasswordsCheck; IpProfile_SBCRemoveCSRC |
|
■
|
Updated parameters: ProxySet_IsProxyHotSwap (values); IsUserPhone (CLI typo); IsUserPhoneInFrom (typo CLI); AuthPassword (replaced Password); TLSContexts_ServerCipherString (OpenSSL URL); TLSContexts_ClientCipherString (OpenSSL URL); TLSContexts_ServerCipherTLS13String (OpenSSL URL); TLSContexts_ClientCipherTLS13String (OpenSSL URL); UdpPortSpacing (2); GW Group Registered Status |
|
|
89839
|
|
■
|
Updated to LR Ver. 7.40A.300.012 (7.4.300-01) |
|
■
|
New sections: Configuring Web Interfaces; Configuring Telnet Interface; Configuring SSH Interfaces; Displaying Referenced Document List; Viewing Default Certificate Authorities; Configuring SIP Header Value Encryption; Configuring Performance Monitoring for Short and Long Calls |
|
■
|
Updated sections: Call Setup Rule Examples (AD Teams example); AD-based Routing for Microsoft Teams or Skype for Business (CSR); Overview of LCR (example typo); Creating a Login Welcome Message (typo); Configuring Call Preemption for SBC Emergency Calls (note for resources); Web Login Authentication using Smart Cards (removed); Dial Plan Matching Priority (example typo); Downloading and Uploading a Configuration Package File (certificates); Enabling SSH with RSA Public Key for CLI; Digit Mapping; Configuring SNMPv3 Users (online); Computer Requirements (screen resolution); Generating Private Keys for TLS Contexts (Private Key Format); Configuring IP Network Interfaces (IPv6 and two OAMPs); Getting Help (document resources); Areas of Web Interface (document resources); Configuring Coders Groups (table redesign); Viewing Device Status on Monitor Page (Transactions per Sec) |
|
■
|
New parameters: NetworkInterfaceStatusCheck; NATTranslation_SrcIPInterfaceName; TLSContexts_UseDefaultCABundle; SNMPIPv6Interface; SNMPInterface; SNMPIPv6TrapManagerHostName; NTPInterface; NTPEnable; RadiusServers_InterfaceName; SDRRemoteServers_InterfaceName; CDRRemoteServers_InterfaceName; SyslogInterface; TelnetInterfaces; WebInterfaces; SshInterfaces; ExternalDocumentsBaseURL; BackwardPTBehavior; HostHeaderProtection; EncryptKeyAES256; AUPDInterface; RxT38OverRTPPayloadType; LongCallMinutes; InvalidLoginReport |
|
■
|
Updated parameters: InterfaceTable_InterfaceMode (IPv6 stateless and DHCP); LoggingFilters_Value (ipv6); EnableWebAccessFromAllInterfaces (removed); AdditionalManagementInterfaces (removed); TelnetServerPort (removed); SSHServerPort (removed); SIPRecRouting_RecordingTrigger (Media Start); AudioCodersGroups; AudioCoders; [ModemBypassPayloadType; RxT38OverRTPPayloadType (note); RTPNoOpPayloadType (note); RFC2833RxPayloadType (note); RFC2198PayloadType (note); PlayRBTone2Trunk (description); PlayRBTone2Tel (description); IPGroup_DedicatedConnectionMode (description); LoggingFilters_LogDestination (OVOC QoE); PIIMaskPrivateInfoForOVOC (Web name); DefaultNumber (description); TLSContexts_DHKeySize (4096 removed); EnableMgmtTwoFactorAuthentication (removed); SIPTCPTimeout default); FakeTCPalias (web parameter); TrunkGroup_TrunkGroupNum (values); EnableCoreDump (default and no restart); ReliableConnectionPersistentMode (description); V1501SPRTPayloadTypeRx (ini); V1501SSEPayloadTypeRx (ini); WebUsers_SessionLimit (range); Test_Call_PlayToneIndex (range); IpProfile_SBCRemoteReferBehavior (description); HeldTimeout (description); StaticRouteTable_PreferredSourceInterfaceName (removed); RadiusTrafficType (removed) |
|
■
|
Miscellaneous: "Reset" button renamed "Restart" |
|
|
89840
|
|
■
|
Updated to LTS Ver. 7.40A.250.528 (7.4.250-4) |
|
■
|
Updated sections: Downloading the Debug (and Core Dump) File (client defaults file); Reporting Management User Activities (syslog format); Configuring Logging Filter Rules (syslog and log type) |
|
■
|
New parameters: WSTunInterfaceName |
|
■
|
Updated parameters: RadiusLocalCacheTimeout (default); DisableRS232 (default) |
|
|
89841
|
|
■
|
Updated sections: Filtering IP Network Traces using Wireshark-Like Expressions (ip for all IPv4); Configuring WebSocket Tunnel with OVOC (cloud platforms); Configuring Proxy Sets (max. DNS-resolved) |
|
■
|
Updated parameters: EnableDID; KeyCFDoNotDisturb; OSNAccessVlan (CLI path); OSNBlockPort (CLI path) |
|
|
89842
|
|
■
|
Updated to LTS Ver. 7.40A.250.609 (7.4.250-5) |
|
■
|
New sections: Reliable (TCP/TLS) Connections |
|
■
|
New parameter: RegistrationSyncMode |
|
■
|
Updated parameters: ReliableConnectionPersistentMode |
|
|
89843
|
|
■
|
Updated to LR Ver. 7.40A.400.023 (7.4.400-01) |
|
■
|
New sections: Monitoring IP Entities for Ethernet Port Redundancy; Running Multiple Non-Interactive SSH Commands from Command Line |
|
■
|
Updated sections: Configuring SIP Recording Rules (SRS max); Configuring a Description for Telephony Ports; Configuring Ethernet Port Groups (active port display); Enabling SSH for Public Key Authentication (Web path); Configuring Device for QoE Reporting to OVOC (no secondary address); Configuring SNMP Trap Destinations with IP Addresses (check box cleared); Configuring Wireshark Packet Capturing using RPCAP (recommendations) |
|
■
|
New parameters: MSRPConnectionEstablishTimeout; EthPortGroupNetworkMonitor; EtherGroupTable_MonitorThreshold; SIPInterface_MSRPTCPPort; SIPInterface_MSRPTLSPort |
|
■
|
Updated parameters: CpMediaRealm_TCPPortRangeStart (removed); CpMediaRealm_TCPPortRangeEnd (removed); MessagePolicy_MaxMessageLength (max); MessagePolicy_MaxHeaderLength (max); MessagePolicy_MaxBodyLength (max); MessagePolicy_MaxNumHeaders (max); MessagePolicy_MaxNumBodies (max); InvalidLoginReport; AccessList_Use_Specific_Interface (default); AccessList_PrefixLen (default); MgmtUseLocalUsersDatabase (web name); IPGroup_DedicatedConnectionMode (value name change); RestCdrHttpServer (web name and row pointer); MgmntLDAPGroups_Group (case-insensitive); MgmntLDAPGroups_Level (note); IpProfile_SBCRemoteUpdateSupport (description option 3); IP2IPRouting_DestType (description for all users) |
|
|
89844
|
|
■
|
Updated to LTS Ver. 7.40A.250.836 (7.4.250-7) |
|
■
|
Updated sections: Configuring Firewall Rules (defaults changed prefix length); Configuring SIP Message Manipulation (max. header value length); Dial Plan Notations (wildcard) |
|
■
|
New parameters: IpProfile_SBCPrecondition; ProxySet_PeerHostNameVerificationMode; [ProxySet_TLSRemoteSubjectName; Classification_TLSRemoteSubjectName |
|
■
|
Updated parameters: AccessList_Use_Specific_Interface (default); AccessList_PrefixLen (default); ProxySet_EnableProxyKeepAlive (new option fake); CallSetupRules_AttributesToGet (max) |
|
|
89845
|
|
■
|
Updated to LR Ver. 7.40A.400.063 (7.4.400-03) and LTS Ver. 7.40A.250.908 (7.4.250-8) |
|
■
|
Updated sections: Alternative Tel-to-IP Routing Based on SIP Responses (web path); Alternative Tel-to-IP Routing upon SIP 3xx with Multiple Contacts (web path); DHCP-based Provisioning (IPv4 and MAC) |
|
■
|
New parameters: IPGroup_TeamsLocalMOSync |
|
■
|
Updated parameters: ForkingDelayTimeForInvite (web parameter) |
|
|
89846
|
|
■
|
Updated to LR Ver. 7.40A.500.010 (7.4.500) |
|
■
|
New sections: Sending SIP INFO Messages with DTMF to SRS; Configuring Background Tones for SBC Calls |
|
■
|
Updated sections: Downloading and Uploading the Configuration Package File; SIPREC SIP-based Media Recording
(RTT); Customizing CDRs for Gateway Calls (Var.Call.Dst.UserDefined); CDR Field Description (Gateway field Var Call User Defined 1-5); Reporting Management User Activities (passwords hidden); Downloading and Uploading the Configuration Package File (7-Zip); Configuring SBC User Information Table through Web Interface (synchronization) |
|
■
|
New parameters: FwdSignalingToSIPRec; HostName (CLI path); HeaderForTransfer; IpProfile_DisconnectOnBrokenConnection (reroute with original SIP headers) |
|
■
|
Updated parameters: IPGroup_AuthenticationMode (description); WebUsers_SessionLimit (description); GWCDRFormat_FieldType (Var Call User Defined);
RegistrationSyncMode (SBC User Information) |
|
|
89847
|
|
■
|
Updated to LTS Ver. 7.40A.251.026 (7.4.250-9) |
|
■
|
Updated sections: Configuring Management User Accounts (plain text passwords for shared settings); Configuring SNMP V3 Users (plain text passwords for shared settings) |
|
■
|
New parameters: DisconnectSubscriptionsMode; LimitIncomingIcmpEchoRequests |
|
■
|
Updated parameters: IPGroup_TeamsLocalMOSync (removed); Classification_TLSRemoteSubjectName (description); ProxySet_TLSRemoteSubjectName (description); ProxySet_PeerHostNameVerificationMode (description); ProxyIPListRefreshTime |
|
|
89848
|
|
■
|
Updated sections: Configuring the Primary Syslog Server Address (VoIP Debug Level parameter); Configuring Table ini File Parameters ($$ removed) |
|
■
|
Updated parameters: Account's Password (question mark); InboundMediaLatchMode (description strict) |
|
■
|
Miscellaneous: ini prefix removed from parameters |
|
|
89849
|
|
■
|
Updated to 7.40A.251.147 (7.4.250-10) |
|
■
|
New parameters: CallInfoListMode |
|
■
|
Updated parameters: LineBuildOut.Loss (CLI typo); ClockMaster (CLI command typo); EnableCoreDump (default); ClassificationFailureResponseType (CLI typo); EtherGroupTable_Mode (restrictions) |
|
|
89850
|
|
■
|
Updated to 7.40A.500.357 (7.4.500-1) |
|
■
|
New sections: Load Balancing SIPREC SRSs using IP Group Set; Configuring Voice Quality for Unregistered User |
|
■
|
Updated sections: ICE for Media; Configuring SIP Recording Rules; Configuring Registered User Voice Quality (path to page); On-Demand SIPREC using SIP INFO Message (multiple IP Groups); Configuring Management User Accounts (folder access per user level) |
|
■
|
New parameters: SRSIPGroupSetName; SwitchCoderUponVoiceQuality; DisconnectSubscriptionsMode |
|
■
|
Updated parameters: SBCIceMode (Full); SIPConnect (description); DisconnectOnBrokenConnection; MSRPConnectionEstablishTimeout |
|
|
89852
|
|
■
|
Updated to 7.40A.251.283 (7.4.250-11) |
|
■
|
Updated sections: Configuring Management User Accounts ("New" user in CLI) |
|
■
|
Updated parameters: EnableSIPRemoteReset (description); RetryAfterMode (CLI command) |
|
|
89852
|
|
■
|
Updated to 7.40A.500.775 (7.4.500-2) |
|
■
|
New section: Configuring Static ARP Table |
|
■
|
Updated sections: Implementing ICE for Media Sessions (keepalive); Configuring Message Session Relay Protocol (enable); Configuring Maximum SBC Call Duration (Var.Call.Dst|Src.MaxDuration); Configuring Secondary Syslog Servers (Kafka); Configuring Test Call Endpoints (note re REST API); Examples of Call Setup Rules (Abort and destination tag); Configuring Call Setup Rules (Abort and destination tag); Configuring SBC IP-to-IP Routing Rules (PreRouteCallSetupRulesSetId); Configuring WebRTC (Enforce Media Order); Configuring Management User Accounts (max. 10 sessions); Configuring a Hostname for Web Interface (recommended); Downloading and Uploading the Configuration Package File (CLI Startup Script); Floating License Model (usage note); Capacity for Signaling, Media and User Registrations (URL link) |
|
■
|
New parameters: EnableMSRP; VideoDiffServ; StaticArp; KeepInitialIncomingINVITE; PreRouteCallSetupRulesSetId; Topic (Syslog Servers table); 'Kafka Connection String' (Syslog Servers table) |
|
■
|
Updated parameters: WebHostname (web name renamed 'Web Server Name'); ClassifyByProxySet (new value Enable for OPTIONS); LDAPAuthFilter (max. chars); 'Transport Protocol' (KAFKA value - Syslog Servers table); SystemLogSize (range and default); SBCEnforceMediaOrder (Web parameter added); HostHeaderProtection (removed); DNSrebindingProtectionEnabled (removed); HTTPSOnly (note re SSO OVOC); CmpFileURL (online); ; NoRTPDetectionTimeout (n/a MSRP note); DNSCache (description); ProxyIPListRefreshTime (DNS cache); DNSResolveMethod (DNS cache); ProxyIp_IpAddress (DNS cache) |
|
|
89853
|
Typo (CAS removed)
|
|
89854
|
|
■
|
Updated to 7.40A.500.775 (7.4.250-14 / 7.4.250-13) |
|
■
|
Updated sections: OAuth 2.0 Based SIP Message Authentication (path updated) Syslog Message Format (SUp/seq #); Configuring SIP Message Manipulation (max chars for condition); Downloading the Debug (and Core Dump) File (TAR file and licenses); Configuring Management User Accounts (New users and LDAP/RADIUS) |
|
■
|
New parameters: LDAPAuthFilter ($ mandatory); SendAcSessionIDHeader (CLI send-acsessionid); LoggingFilters_FilterType (user is source and dest); BellModemTransportType (def); SBCPrecondition (notes re requirement); condition (max chars 200) |
|
■
|
Updated parameters: UseWebLogo (CLI web-logo-enable); WebLogoText (CLI web-logo-text); SyslogLogLevel (return to default) |
|
|
89855
|
|
■
|
Updated to 7.40A.600.014 (7.4.600) |
|
■
|
New sections: Configuring Interval for QoE Report Collection and Generation |
|
■
|
Updated sections: Viewing Default Certificate Authorities (updated list) |
|
■
|
New parameters: QOEMediaStatisticTimer; InCallRouteMode (Proxy Set); ConnectionReuse (Proxy Set); NoRTPMode |
|
■
|
Updated parameters: DNSResolveMethod (NAPTR behavior); FailedOptionsRetryTime (CLI command); CheckPasswordHistory (CLI command); NoRTPDetectionTimeout; UseSIPTgrp (new 5 and 6) |
|
|
89856
|
|
■
|
Updated to 7.40A.501.141 (7.4.500-3) |
|
■
|
Updated sections: Configuring SIP Response Codes for Alternative Routing Reasons (max. 4 proxies); Using Proprietary SIP X-AC-Action Header (supported SIP methods) |
|
■
|
Updated parameters: IsProxyHotSwap (max. 4 proxies for alt) |
|
■
|
New parameters: EnableHttpClientDbgMsg; HTTPLogFilter; InCallRouteMode (Proxy Set) |
|
■
|
Updated parameters: InfoType (new Syslog value in Syslog Servers table); WSTunServer (FQDN) |
|
|
89857
|
|
■
|
Updated to 7.40A.501.384 (7.4.500-4) |
|
■
|
New sections: Starting and Stopping Debug Recording |
|
■
|
Updated sections: Configuring Management Access List (table renamed / management interface type); Configuring Alarm Thresholds for Performance Monitoring (0 invalid for Clear Watermark)); Enabling LDAP-based User Login Authentication (note re both LDAP and RADIUS); RADIUS-based User Login Authentication (note re both LDAP and RADIUS); Configuring Firewall Rules (insert) |
|
■
|
New parameters: EnableHttpClientDbgMsg; HTTPLogFilter; SBCWizardUrl; AupdMaxTransferTime; EnableSnmpAuthenticationTrap; DebugRecordingTimeout; DebugRecordingStatus |
|
■
|
Updated parameters: Prefix2ExtLine (CLI command); DisableSNMP (description); CallSuccessSIPReasons (description); NoRTPMode (description); SNMPSysOid (removed); SNMPTrapEnterpriseOid (removed); V1501SSEPayloadTypeRx (removed); V1501SPRTPayloadTypeRx (removed) |
|
|
89858
|
|
■
|
Updated to 7.40A.600.203 (7.4.600-1) |
|
■
|
New sections: On-Demand SIPREC using SIP 200 OK Responses |
|
■
|
Updated sections: SNMP-Based Management (64-bit counter); Configuring Message Session Relay Protocol (IPv6) |
|
■
|
New parameters: ClassifyByRegDB; DisconnectInDialogSubscribeFailure; EnforceMediaOrder |
|
■
|
Updated parameters: InCallRouteMode; NoRTPMode (note re outgoing leg); DisconnectOnBrokenConnection (note re outgoing leg) |
|