Notice
Information contained in this document is believed to be accurate and reliable at the time of printing. However, due to ongoing product improvements and revisions, AudioCodes cannot guarantee accuracy of printed material after the Date Published nor can it accept responsibility for errors or omissions.
This document is subject to change without notice.
Date Published: September-18-2024
WEEE EU Directive
Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed of with unsorted waste. Please contact your local recycling authority for disposal of this product.
Security Vulnerabilities
All security vulnerabilities should be reported to vulnerability@audiocodes.com.
Customer Support
Customer technical support and services are provided by AudioCodes or by an authorized AudioCodes Service Partner. For more information on how to buy technical support for AudioCodes products and for contact information, please visit our website at https://www.audiocodes.com/services-support/maintenance-and-support.
Documentation Feedback
AudioCodes continually strives to produce high quality documentation. If you have any comments (suggestions or errors) regarding this document, please fill out the Documentation Feedback form on our website at https://online.audiocodes.com/documentation-feedback.
Stay in the Loop with AudioCodes
Notes and Warnings
Open source software may have been added and/or amended for this product. For further information, contact your AudioCodes sales representative.
The device is an INDOOR unit and thus, must be installed only indoors. In addition, Ethernet port interface cabling must be routed only indoors and must not exit the building.
Caution Electrical Shock: Do not open or disassemble this device. The device carries high voltage and contact with internal components may expose you to electrical shock and bodily harm.
The device must be installed and serviced only by qualified service personnel.
For deployment in Finland, Sweden and Norway, the device must be installed only in restricted access locations that are compliant with ETS 300253 guidelines where equipotential bonding has been implemented.
Disconnect the device from the mains and Telephone Network Voltage (TNV) before servicing.
Related Documentation
|
Document Name |
|---|
Document Revision Record
|
LTRT |
Description |
|---|---|
|
10388 |
Max. power consumption updated. |
|
10389 |
Status LED flashing for upgrade; miscellaneous formatting. |
|
10390 |
Operating environment specifications updated. |
|
10391 |
AC power cable warning (Japanese); STATUS LED update. |
|
10392 |
Wall-mounting added. |
|
10393 |
Logo updated. |
|
10394 |
Duration of press updated for reset to defaults. |
|
10395 |
Device replacement |