Performing Manual D-Channel Switchover in NFAS Group
If an NFAS group is configured with two D-channels (Primary and Backup), you can do a manual switchover between these D-channels.
| ➢ | To manually switchover from active to standby D-channel: |
| 1. | Open the NFAS Group & D-Channel Status page (Monitor menu > PSTN Status tab > NFAS Group & D-Channel Status). |
| 2. | Select the required NFAS group, and then click the Switch Activity button. |
| ● | The Switch Activity button is unavailable (i.e, grayed out) if a switchover cannot be done due to, for example, alarms or unsuitable states. |
| ● | This feature is applicable only to T1 ISDN protocols supporting NFAS, and only if the NFAS group is configured with two D-channels. |