Auxiliary and Configuration File Name Parameters

Determines if all the device's parameters are set to their defaults before processing the updated ini file.

Note: The parameter is applicable only for automatic HTTP update or Web ini file upload (not applicable if the ini file is loaded using BootP).

Determines if the device's configuration (parameters and files) is saved to flash (non-volatile memory).

Defines the name of the file containing the Call Progress Tones definitions.

For the ini file, the name must be enclosed by a single quotation mark (e.g., 'cpt_us.dat').

For more information on how to create and upload this file, refer to the document DConvert Utility User's Guide.

Note: For the parameter to take effect, a device restart is required.

Defines the name of the file containing the Prerecorded Tones.

Note: For the parameter to take effect, a device restart is required.

Defines the CAS file name (e.g., 'E_M_WinkTable.dat'), which defines the CAS protocol (where x denotes the CAS file ID 0 to 7). It is possible to define up to eight different CAS files by repeating the parameter. Each CAS file can be associated with one or more of the device's trunks, using the parameter CASTableIndex or it can be associated per B-channel using the parameter CASChannelIndex.

For the ini file, the name must be enclosed by a single quotation mark (e.g., 'cas_us.dat').

Note: For the parameter to take effect, a device restart is required.

Defines the Dial Plan name (up to 11-character strings) per trunk.

For the ini file, the name must be enclosed by a single quotation mark (e.g., 'dial_plan_2.dat').

Note: The x in the ini file parameter name denotes the trunk number, where 0 is Trunk 1.

Defines the name of the Dial Plan file.

For the ini file, the name must be enclosed by a single quotation mark (e.g., 'dial_plan.dat').

Note: This parameter is used only for backward compatibility. For loading (importing) Dial Plan files, use the Dial Plan table instead (see Importing Dial Plans).