Notice
Information contained in this document is believed to be accurate and reliable at the time of printing. However, due to ongoing product improvements and revisions, AudioCodes cannot guarantee accuracy of printed material after the Date Published nor can it accept responsibility for errors or omissions.
This document is subject to change without notice.
Date Published: September-18-2024
WEEE EU Directive
Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed of with unsorted waste. Please contact your local recycling authority for disposal of this product.
Security Vulnerabilities
All security vulnerabilities should be reported to vulnerability@audiocodes.com.
Customer Support
Customer technical support and services are provided by AudioCodes or by an authorized AudioCodes Service Partner. For more information on how to buy technical support for AudioCodes products and for contact information, please visit our website at https://www.audiocodes.com/services-support/maintenance-and-support.
Documentation Feedback
AudioCodes continually strives to produce high quality documentation. If you have any comments (suggestions or errors) regarding this document, please fill out the Documentation Feedback form on our website at https://online.audiocodes.com/documentation-feedback.
Stay in the Loop with AudioCodes
Notes and Warnings
Adhere to all warning statements in this document
The device is an INDOOR unit and therefore, must be installed only indoors.
Caution Electrical Shock
Do not open or disassemble this device. The device carries high voltage and contact with internal components may expose you to electrical shock and bodily harm.
The device must be installed and serviced only by qualified service personnel.
For deployment in Finland, Sweden and Norway, the device must be installed only in restricted access locations that are compliant with ETS 300253 guidelines where equipotential bonding has been implemented.
Disconnect the device from the mains and Telephone Network Voltage (TNV) before servicing.
Open source software may have been added and/or amended for this product.
Related Documentation
|
Document Name |
|---|
|
SBC-Gateway Series Release Notes for Latest Release Versions |
|
SBC-Gateway Series Release Notes for Long Term Support Versions |
Document Revision Record
|
LTRT |
Description |
|---|---|
|
10480 |
Initial document release for Version 7.0. |
|
10481 |
Connector pinouts updated for serial interface. |
|
10482 |
Max. power consumption updated. |
|
10483 |
Status LED for software upgrade. |
|
10484 |
19-inch rack mount; wall mounting. |
|
10485 |
AC power cable warning (Japanese). |
|
10486 |
Wall-mounting template. |
|
10487 |
FXS and FXO interfaces added. |
|
10488 |
LAN FE changed to GE. |
|
10489 |
Typo re 19-inch rack mount shelf. |
|
10490 |
Logo updated; PSTN Fallback/Analog lifeline updated. |
|
10491 |
Serial cabling updated. |
|
10492 |
Duration of press for default reset updated. |
|
10493 |
Device replacement procedure. |