PacketSmart Parameters

The PacketSmart parameters are described in the table below. For more information on PacketSmart, see Configuring PacketSmart Agent for Network Monitoring.

Parameter

Description

'PacketSmart Agent Mode'

configure system > packetsmart enable

[PacketSmartAgentMode]

Enables the embedded PacketSmart agent.

■

[0] Disable (Default)

■

[1] Enable

Note: For the parameter to take effect, a device restart is required.

'PacketSmart Server IP Address'

configure system > packetsmart server address

[PacketSmartIpAddress]

Defines the IP address of the PacketSmart server with which the PacketSmart agent communicates.

The default is 0.0.0.0.

'PacketSmart Server Port'

configure system > packetsmart server port

[PacketSmartIpAddressPort]

Defines the TCP port of the PacketSmart server to which the PacketSmart agent connects.

The default is 80.

'Monitoring Interface'

configure system > packetsmart monitor voip interface-if

[PacketSmartMonitorInterface]

Assigns an IP network interface (configured in the IP Interfaces table) that handles the voice traffic.

Note: For the parameter to take effect, a device restart is required.

'Network Interface'

configure system > packetsmart network voip interface-if

[PacketSmartNetworkInterface ]

Assigns an IP network interface (configured in the IP Interfaces table) for communicating with the PacketSmart server. This is typically the OAMP interface.

Note: For the parameter to take effect, a device restart is required.