Configuring SNMP Community String for Traps

You can configure a unique password-like community string for SNMP traps. The device sends the traps with this community string.

The valid value is a string of up to 30 characters that can include only the following:

■ Uppercase letters (A to Z)
■ Lowercase letters (a to z)
■ Numbers (0 to 9)
■ Hyphen (-)
■ Underline (_)
● The community string value cannot contain the following:
✔ Wide characters
✔ Spaces
● If you don't configure a trap community string, the default community string is “trapuser”.
➢ To configure community string for traps:
1. Open the SNMP Settings page (Setup menu > Administration tab > SNMP folder > SNMP Settings).
2. In the 'Trap Community String' field, type a community string:

3. Click Apply.