Introduction
This document provides a hardware description of the Mediant 800 Gateway and E-SBC (hereafter referred to as device) and step-by-step procedures for mounting and cabling the device.
The device supports the following interfaces (customer ordered):
|
●
|
Mediant 800B: Up to 2 E1/T1 port interfaces (over single copper wire pair). |
|
●
|
Mediant 800C: Up to 4 E1/T1 port interfaces |
|
■
|
Up to 8 BRI ports (supporting up to 16 voice channels). |
|
■
|
Up to 12 FXS port interfaces. |
|
■
|
Up to 12 FXO port interfaces. |
|
■
|
12 LAN Ethernet interfaces - up to 4 Gigabit Ethernet ports and up to 8 Fast Ethernet ports. These ports operate in port-pair redundancy, providing up to 6 port-pair groups. |
|
●
|
Mediant 800B: Single AC power inlet |
|
●
|
Mediant 800C: Single AC power inlet, and a DC power inlet (optional, customer ordered) |
|
●
|
Mediant 800 includes two hardware revisions which differ as follows: |
|
✔
|
Mediant 800B: Max. 2 E1/T1; AC power only |
|
✔
|
Mediant 800C: Max. 4 E1/T1; AC and DC power (optional) |
|
●
|
Hardware configurations may change without notice. Currently available hardware configurations are listed in AudioCodes Price Book. For available hardware configurations, contact your AudioCodes sales representative. |
|
●
|
The Fast Ethernet ports are available only on "pure" SBC Mediant 800 (i.e., without PSTN / Gateway interfaces). |
|
●
|
For software configuration, refer to the User's Manual. |