Notice

For safety, environment and regulatory information, refer to the printed document “Safety, Compliance and Warranty Information” included in the products packaging.

The device is an INDOOR unit and thus, must be installed ONLY indoors. In addition, Ethernet port interface cabling     must be routed only indoors and must not exit the building.

Installation of this device must be in a weather protected location of maximum ambient temperature of 35°C.

This device must be installed only in a restricted access location.

Service of the device must be made only by qualified service personnel.

AC powered units must be connected only to a grounded AC mains power socket.

Circuit Overloading: Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on over-current protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

Caution Laser: This device contains a Class 1 LED/Laser emitting device, as defined by 21CFR 1040 and IEC825. Do not stare directly into the beam or into fiber optic terminations as this can damage your eyesight.

Caution Electrical Shock: Do not attempt to open or disassemble this device. The device carries high voltage. Contact with internal components may cause electrical shock and bodily harm.

For all service and maintenance issues, contact AudioCodes technical support (see Customer Support above).