General Parameters

Defines a hostname (FQDN) for the device's Web interface. This can be used to access the Web interface instead of the device's IP address.

By default, no value is defined.

For more information, see Configuring a Hostname for Web Interface.

Note: If not configured, the device uses the [Hostname] parameter.

Defines a hostname for the device, which is used for various functionality such as the CLI prompt name.

The valid value is a string of up to 18 characters. By default, no value is defined.

For more information, see Configuring a Hostname for the Device.

Note: To configure a hostname for accessing the device's Web interface, use the [WebHostname] parameter.

Disables autocompletion when entering the management login username in the 'Username' field of the device's Web interface. Disabling autocompletion may be useful for security purposes by hiding previously entered usernames and thereby, preventing unauthorized access to the device's management interface.

Enables the enforcement of password complexity requirements for management users (see Configuring Management User Accounts), SNMP Community Strings (see Configuring SNMP Community Strings), and SNMPv3 users (see Configuring SNMPv3 Users).

Note:

Defines the minimum length (number of characters) of the management user's login password when password complexity is enabled (using the [EnforcePasswordComplexity] parameter).

The valid value is a string of 8 to 20 characters. The default is 8.

Enables the device to enforce password history policy (reuse an old password), which prohibits a user from changing its password to any of the user's four previous passwords.

Note: The parameter is not applicable to the password for the CLI privileged mode (> enable).

Enables user login authentication based on OAuth 2.0.

For more information, see Enabling OAuth-based User Login Authentication.

Enables (allows) the deletion of all users in the Local Users table (see Configuring Management User Accounts). This is used when an external, third-party service (e.g., LDAP. RADIUS, or OAuth) is used to authenticate users.

For more information, see Deleting All Users in Local Users Table.

Locks the device, whereby existing calls are terminated (optionally, after a graceful period) and new calls are rejected.

For more information, see Locking and Unlocking the Device.

Defines a graceful period (in seconds) before the device locks. During this period, the device doesn't accept any new calls, allowing only existing calls to continue until the timeout expires. If all existing calls end before the timeout expires, the device locks. If there are still existing calls when the timeout expires, the device terminates them and then locks.

The valid value is 0 to 32,768 seconds. The default is 0, meaning no graceful lock (i.e., immediate lock). A value of -1 means that the device locks only after all the existing calls end (on their own accord).

For more information, see Locking and Unlocking the Device.

Defines the number of consecutive failed device restarts (boots), after which the device automatically restores its software and configuration based on (by loading) the default System Snapshot.

The valid value is 1 to 10. The default is 6.

For more information, see Rescue Options using System Snapshots.

Enables the device to close existing TLS/TCP client connections and reject incoming TLS/TCP client connections when the device is in locked state.

For more information, see Locking and Unlocking the Device.

Enables the device to operate with the Floating License.

For more information, see Floating License Model.

Note: For the parameter to take effect, a device restart is required.

Defines an SBC capacity profile (Allocation Profile) for the Floating License feature.

Note: For the parameter to take effect, a device restart is required.

Defines registered users capacity for a customized Allocation Profile for the Floating License feature.

Note:

Defines SBC media session capacity for a customized Allocation Profile for the Floating License feature.

Note:

Defines SBC signaling session capacity for a customized Allocation Profile for the Floating License feature.

Note:

Defines WebRTC session capacity for a customized Allocation Profile for the Floating License feature.

Note:

Defines SIPREC session capacity for a customized Allocation Profile for the Floating License feature.

Note:

Defines a limit of the registered user capacity for a customized Allocation Profile for the Floating License feature.

Note: The parameter is applicable only when the 'Allocation Profile' is configured to Custom.

Defines a limit of the SBC media session capacity for a customized Allocation Profile for the Floating License feature.

Note: The parameter is applicable only when the 'Allocation Profile' is configured to Custom.

Defines a limit of the SBC SIP signaling session capacity for a customized Allocation Profile for the Floating License feature. Note: The parameter is applicable only when the 'Allocation Profile' is configured to Custom.

Defines a limit of the transcoding session capacity for a customized Allocation Profile for the Floating License feature.

Note: The parameter is applicable only when the 'Allocation Profile' is configured to Custom.

Defines a limit of the WebRTC session capacity for a customized Allocation Profile for the Floating License feature.

Note: The parameter is applicable only when the 'Allocation Profile' is configured to Custom.

Defines a limit of the SIPREC session capacity for a customized Allocation Profile for the Floating License feature.

Note: The parameter is applicable only when the 'Allocation Profile' is configured to Custom.

Defines the device's Product Key.

The valid value is a string of up to 40 characters.

Defines the console access mode.

Note: For the parameter to take effect, a device restart is required.