Notice

Information contained in this document is believed to be accurate and reliable at the time of printing. However, due to ongoing product improvements and revisions, AudioCodes cannot guarantee accuracy of printed material after the Date Published nor can it accept responsibility for errors or omissions. Updates to this document can be downloaded from https://www.audiocodes.com/library/technical-documents.

This document is subject to change without notice.

Date Published: December-08-2024

WEEE EU Directive

Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed of with unsorted waste. Please contact your local recycling authority for disposal of this product.

Security Vulnerabilities

All security vulnerabilities should be reported to vulnerability@audiocodes.com.

Customer Support

Customer technical support and services are provided by AudioCodes or by an authorized AudioCodes Service Partner. For more information on how to buy technical support for AudioCodes products and for contact information, please visit our website at https://www.audiocodes.com/services-support/maintenance-and-support.

Documentation Feedback

AudioCodes continually strives to produce high quality documentation. If you have any comments (suggestions or errors) regarding this document, please fill out the Documentation Feedback form on our website at https://online.audiocodes.com/documentation-feedback.

Stay in the Loop with AudioCodes

Twitter Facebook LinkedIn YouTube Blog

Notes and Warnings

The device is an indoor unit and therefore, must be installed only INDOORS.

Configuration and usage of this device must be in accordance with your local security regulations, telephony regulations, or any other related regulations.

The scope of this document doesn't fully cover security aspects for deploying the device in your environment. Security measures should be done in accordance with your organization’s security policies. For basic security guidelines, refer to the Recommended Security Guidelines document.

Throughout this manual, unless otherwise specified, the term device refers to your AudioCodes product.

Before configuring the device, ensure that it is installed correctly as instructed in the Hardware Installation Manual.

OPEN SOURCE SOFTWARE. Portions of the software may be open source software and may be governed by and distributed under open source licenses, such as the terms of the GNU General Public License (GPL), the terms of the Lesser General Public License (LGPL), BSD and LDAP. If any open source software is provided in object code, and its accompanying license requires that it be provided in source code as well, the Buyer may receive such source code by contacting AudioCodes.

This device includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/).
This device includes cryptographic software written by Eric Young (eay@cryptsoft.com).
Some of the features described in this document are licensed features and are available only if the installed License Key contains these features.

Related Documentation

Document Name

SBC-Gateway Release Notes for Long Term Support (LTS) Versions

SBC-Gateway Series Release Notes for Latest Release (LR) Versions

Installation Manuals

MP-1288 Analog Media Gateway Hardware Installation Manual

MP-1288 High-Density Analog Media Gateway Quick Guide

Complementary Guides

Gateway and SBC CLI Reference Guide

SBC-Gateway Performance Monitoring Reference Guide

SBC-Gateway Series SNMP Alarm Reference Guide

SBC-Gateway SNMP Reference Guide

SBC-Gateway Recommended Security Guidelines

SIP Message Manipulation Syntax Reference Guide

REST API for SBC-Gateway Devices

IP-based Voice Mail Configuration Note

Utility Guides

INI Viewer & Editor Utility User's Guide

DConvert Utility User's Guide

CLI Wizard Utility User's Guide

Syslog Viewer User's Guide

Document Revision Record

LTRT

Description

28233

Initial document release for Ver. 7.4.

28237

Updated to Ver. 7.40A.005.313
New sections: Notations and Priority Matching for Dial Plan Patterns
Updated sections: Configuring WebRTC ('SBC Media Security Mode' added); Configuring Proxy Sets (capacity); Debugging PSTN Calls through CLI (typo reset); Configuring Management User Accounts (typo); Configuring Upstream Hosts (note); Collecting Debug Recording Messages (PSTN plugin); Viewing Syslog Messages (note re acsyslog.dll removed); Replacing Corporate Logo with Text; Configuring SNMP Community Strings (read-only and read-write); Saving Configuration (traffic disruption removed); Configuring Registration Accounts (served-serving combination); Configuring Debug Recording (note re OAMP)
New parameters: EnableConsoleLog
Updated parameters: HTTPProxySyslogDebugLevel (description); LogoFileName (description); UseWebLogo (description); EnableDiagnostics; Account_RegistrarSearchMode (option 1 note)

28238

Updated to Ver. 7.40A.100.011
New sections: Configuring Registered User Voice Quality; Configuring SRTP Crypto Suite Groups; Configuring LDAP Authentication for NGINX HTTP Reverse Proxy; Configuring Wireshark Packet Capturing using RPCAP; Storing Alarms History on Flash
Updated sections: Configuring Malicious Signatures (max. 20); Configuring Proxy Sets (SIP Interfaces and IPv4/IPv6 note); SIP-based Media Recording (typo); Viewing SBC Registered Users (design and MOS); Configuring Call Setup Rules (max. rows etc.); Configuring Registration Accounts (max. rows); Configuring SIP Message Manipulation (max. Set IDs); TLS Context Parameters Relevancy per Application (NGINX); Notations and Priority Matching for Dial Plan Patterns (case); Third-Party Routing Server or AudioCodes Routing Manager (IP Profile); Assigning CSR-based Certificates to TLS Contexts ('Subject Key Identifier', 'Key Usage', 'Extended Key Usage')
New parameters: IgnoreAuthorizationStale; RegUserMosObservationWindow; MosStoredTimeoutForNoCalls; IPGroup_UserVoiceQualityReport; IpProfile_RTCPEncryption; IpProfile_SBCCryptoGroupName; CryptoSuitesGroups; SSHKexAlgorithmsString; SSHCiphersString; SSHMACsString; HTTPServer_BindToDevice; DialPlan_PrefixCaseSensitivity; AlarmsPersistentHistory; SavePersistentHistoryInterval; IpProfile_UsedByRoutingServer
Updated parameters: LdapConfServerMaxRespondTime (note); ; IncrementalIniFileURL (no reset); ProxySet_IsProxyHotSwap; QualityOfServiceRules_RuleMetric (new value); SNMPUsers_AuthProtocol (new values - SHA-2); DisableSNMP (online); TLSContexts_TLSVersion (default); IpProfile_SBCMediaSecurityBehaviour (new value 4); DebugRecordingDestIP (IPv6); CallerIDTransportType (new value 4; 1 obsolete); SipDigestAuthorizationUriMode (CLI); UnRegisterOnStartup (CLI); MaxSdpSessionVersionId (CLI); RegionsConnectivityDialPlan (CLI); DenyAccessOnFailCount (CLI); DenyAuthenticationTimer (CLI); UseRandomUser (CLI)

28240

Updated to Ver. 7.40A.100.114
New sections: Using SIP INVITE to Specify Test Call Duration
Updated sections: Configuring Classification Rules ('Classify By Proxy Set Mode'); CDR Field Description (Is Recorded); Customizing CDRs for SBC Calls and Test Calls (Is Recorded); Reporting MOS Triggered by WebRTC Client; Configuring IP-to-IP Outbound Manipulations (headers); Configuring IP-to-IP Inbound Manipulations (headers); Configuring IP Network Interfaces (Def Gateway); Configuring Static IP Routes (note); Reporting MOS Triggered by WebRTC Client (default duration); Configuring SIP Interfaces (TCP/TLS source ports dynamic); Interworking SIP Early Media (drawing updated); Notations and Priority Matching for Dial Plan Patterns (best match); Configuring Push Notification Servers (typo); On-Demand SIPRec Sessions (note re INFO)
New parameters: ClassifyByProxySetMode; SBCTerminateOptions; IPGroup_TeamsDirectRoutingMode; PreserveMultipartContentType; CpMediaRealm_UsedByRoutingServer; IpProfile_SBCRenumberMID; DTLSTimeBetweenTransmissions; PlayToneOnConnectFailureBehavior; IpProfile_ReceiveMultipleDTMFMethods; AutoUpdateFreqencySeconds; TransparentPayloadType; ProxySet_AcceptDHCPProxyList; DateHeaderTimeSync; DateHeaderTimeSyncInterval; BlockingDurationFactor; DenyAccessCountingValidTime; SBCTerminateOPTIONS
Updated parameters: WebUsers_Username (no spaces); IPProfile_SBCSessionExpiresMode (description); I IPGroup_SIPSourceHostName (typo)

28241

Updated sections: Notations and Priority Matching for Dial Plan Patterns; G.711 Fax and Modem Transport Mode (typo gpmd); Configuring Pre-Parsing Manipulation Rules (max rules)
New parameters: SBCTerminateOPTIONS
Updated parameters: SBCAlertTimeout (description)
Miscellaneous: Cross-references fixed

28243

Updated to Ver. 7.40A.100.233
Updated sections: CDR Field Description (Tenant ID); Filtering IP Network Traces using Wireshark-Like Expressions (example); Notations and Priority Matching for Dial Plan Patterns
New parameters: SipSessionExpiresObserverMode
Updated parameters: UseRandomUser (new value); AUPDResetURLOnWebConfig; sbc-no-alert-timeout (typo)

28244

Updated to Ver. 7.40A.200.005
New sections: Configuring Secondary Syslog Servers; Downloading TLS-Related Files for a Specific TLS Context; Downloading TLS-Related Files for all TLS ContextsConfiguring OAuth Authentication; Authenticating SIP Messages using Device's OAuth2.0 Server with Azure AD; Configuring OAuth 2.0 Servers; Configuring OAuth Servers for User Login Authentication; Enabling OAuth-based User Login Authentication; Configuring a Hostname for Web Interface; Deleting All Users in Local Users Table; Viewing Active Web Interface and CLI Users; Masking PII in CDRs; Masking Digits in Syslog Messages; Masking PII from Syslog Files using PII Log Scrubber Tool
Updated sections: Configuring Syslog Message Severity Level (removed); Call Detail Records (syslog severity); Using Dial Plan Tags for Routing Destinations (CSR); Using Dial Plan Tags for Call Setup Rules; Viewing SBC Registered Users (MOS); Configuring Registered User Voice Quality (MOS); Computer Requirements (Edge); Third-Party Routing Server or ARM (no-answer timeout); Saving and Loading a Configuration Package File (SNMP backup); Configuring the Primary Syslog Server Address; Viewing Device Status on Monitor Page (GW statistics); CDR Field Description (new termination reason); Viewing Registration Status (server address); Configuring WebSocket Tunnel with OVOC (status)
New parameters: ; SyslogServers; SyslogProtocol; SyslogTLSContext; QOESettings_FilterReports; OAuthServers; LoginOAuthServers; OAuthWebLogin; WebHostname; AllowRemoveLocalUsersTable; AccountRegistrarAvoidanceTime; PIIMaskDigits; PIIMaskPrivateInfoInCDRs; PIINumberOfUnmaskedChars; PIIUnmaskedCharsLocation
Updated parameters: UpstreamHost (Max Connections removed); UpstreamGroup (Max Connections added); IPGroup_SourceUriInput (note); CDRHistoryPrivacy (removed); SIPInterface_UDPPort (port uniqueness); SIPInterface_TCPPort (port uniqueness); SIPInterface_TLSPort (port uniqueness); IPOutboundManipulation_SrcTags (max. tags); IPOutboundManipulation_DestTags (max. tags); IP2IPRouting_SrcTags  (max. tags); IP2IPRouting_DestTags (max. tags); LoggingFilters_LogDestination (Call Flow Server renamed OVOC); LoggingFilters_CaptureType (Call Flow renamed SIP Ladder, CDR Only renamed CDR, new IP Group Tag); SSHKexAlgorithmsString (diffie-hellman-group14-sha1); SSHCiphersString (aes256-ctr, aes256-cbc); HTTPSOnly (value 2); SNMPUsers_PrivProtocol (AES-192, AES-256); Account_RegistrarSearchMode (new value 2)

28245

Updated to Ver. 7.40A.100.366
Updated sections: Establishing a CLI Session (failed login); Configuring Telnet for CLI (default); Configuring Management User Accounts (EnforcePasswordComplexity for CLI)
New parameters: IpProfile_SBCAllowOnlyNegotiatedPT; SIPServerDigestAlgorithm
Updated parameters: IPProfile_LocalRingbackTone (range); IPProfile_LocalHeldTone (range); TelnetServerEnable (default); EnableSIPREC (removed)

28246

Updated to Ver. 7.40A.250.001
New sections: Configuring SNI-to-TLS Mapping; On-Demand SIPRec using REST
Updated sections: Configuring OAuth 2.0 Servers (field name typos); Viewing Voice Channel Information; OVOC-Managed Capacity Licenses (SIPRec / WebRTC); Configuring SIP Recording Rules (REST); Masking PII in CDRs; Configuring Registration Accounts (status); On-Demand SIPRec using SIP INFO Message (pause/resume); Configuring Dial Plans (ReferredByTags); Direct Media Calls (X-AC-Action: direct-media)
New parameters: SNI2TLSMapping; AuthenticatedMessageHandling; IP2IPRouting_ModifiedDestUserName; AllocationWebRTCSessions; AllocationSIPRecStreams; LimitSIPRecStreams; SIPRecRouting_RecordingTrigger; SIPRecRouting_SRSRole; PIIMaskPrivateInfoForOVOC; PIIMaskHost; IPGroup_ValidateSourceIP; EnableDNSEnvelop
Updated parameters: SyslogLogLevel (typo); MaxInBoardConferenceCalls (max); DialPlanRule_Tag (valid chars); IPGroup_AuthenticationMode (3)

28248

Updated to Ver. 7.40A.250.255
New sections: Configuring Syslog Message Severity Level;
Updated sections: Configuring Classification Rules (validate IP); Downloading and Uploading ini Configuration/CLI Script/ Configuration Package File (buttons renamed); Configuring SNMP Community Strings (pwd complexity); Reporting Management User Activities (file upload/download); Configuring Management User Accounts (user logged out upon edit / old passwords); Restoring Factory Defaults through CLI (clear TLS files); Viewing Device Information (BID)
Updated parameters: BrokenConnectionEventTimeout (def); Prefix2ExtLine (values); PstnPrefix_SourcePrefix (typo); ProxySet_IsProxyHotSwap (typo in enable); AudioCoders_Sce (value 2)]; AutoUpdatePredefinedTime; AutoUpdateFreqencySeconds; Account_ContactUser (note added); RFC2833RxPayloadType (CLI); RFC2833RxPayloadType (CLI); EnforcePasswordComplexity (SNMPv2 community strings); SyslogServers_SeverityLevel (value names);
New parameters: SyslogLogLevel; CheckPasswordHistory; AbortRetriesOnICMPError.

28250

Updated to Ver. 7.40A.260.007
New sections: Detection of Weak Passwords; Configuring the Weak Passwords List
Updated sections: Configuring Dual Registration for SIP Entity (typo IP); Viewing Tel-to-IP and IP-to-Tel Call Counters (removed); Computer Requirements; TrunkGroup_TrunkGroupNum (values); Customizing SNMP Alarm Severity (EntityID); CDR Field Description ('Released From IP'); SBC Configuration Wizard (screens)
New parameters: IPGroup_DedicatedConnectionMode; WeakPasswordsList; WeakPasswordsCheck; IpProfile_SBCRemoveCSRC
Updated parameters: ProxySet_IsProxyHotSwap (values); IsUserPhone (CLI typo); IsUserPhoneInFrom (typo CLI); AuthPassword (replaced Password); TLSContexts_ServerCipherString (OpenSSL URL); TLSContexts_ClientCipherString (OpenSSL URL); TLSContexts_ServerCipherTLS13String (OpenSSL URL); TLSContexts_ClientCipherTLS13String (OpenSSL URL); GW Group Registered Status

28252

Updated to LR Ver. 7.40A.300.012 (7.4.300-01)
New sections: Configuring Web Interfaces; Configuring Telnet Interface; Configuring SSH Interfaces; Displaying Referenced Document List; Viewing Default Certificate Authorities; Configuring SIP Header Value Encryption; Configuring Performance Monitoring for Short and Long Calls
Updated sections: Call Setup Rule Examples (AD Teams example); AD-based Routing for Microsoft Teams or Skype for Business (CSR); Overview of LCR (example typo); Creating a Login Welcome Message (typo); Configuring Call Preemption for SBC Emergency Calls (note for resources); Web Login Authentication using Smart Cards (removed); Dial Plan Matching Priority (example typo); Downloading and Uploading a Configuration Package File (certificates); Enabling SSH with RSA Public Key for CLI; Digit Mapping; Configuring SNMPv3 Users (online); Computer Requirements (screen resolution); Generating Private Keys for TLS Contexts (Private Key Format); Configuring IP Network Interfaces (IPv6 and two OAMPs); Getting Help (document resources); Areas of Web Interface (document resources); Configuring Coders Groups (table redesign); Viewing Device Status on Monitor Page (Transactions per Sec)
New parameters: NetworkInterfaceStatusCheck; NATTranslation_SrcIPInterfaceName; TLSContexts_UseDefaultCABundle; SNMPIPv6Interface; SNMPInterface; SNMPIPv6TrapManagerHostName; NTPInterface; NTPEnable; RadiusServers_InterfaceName; SDRRemoteServers_InterfaceName; CDRRemoteServers_InterfaceName; SyslogInterface; TelnetInterfaces; WebInterfaces; SshInterfaces; ExternalDocumentsBaseURL; BackwardPTBehavior; HostHeaderProtection; EncryptKeyAES256; AUPDInterface; RxT38OverRTPPayloadType; LongCallMinutes; InvalidLoginReport
Updated parameters: InterfaceTable_InterfaceMode (IPv6 stateless and DHCP); LoggingFilters_Value (ipv6); EnableWebAccessFromAllInterfaces (removed); AdditionalManagementInterfaces (removed); TelnetServerPort (removed); SSHServerPort (removed); SIPRecRouting_RecordingTrigger (Media Start); AudioCodersGroups; AudioCoders; [ModemBypassPayloadType; RxT38OverRTPPayloadType (note); RTPNoOpPayloadType (note); RFC2833RxPayloadType (note); RFC2198PayloadType (note); PlayRBTone2Trunk (description); PlayRBTone2Tel (description); IPGroup_DedicatedConnectionMode (description); LoggingFilters_LogDestination (OVOC QoE); PIIMaskPrivateInfoForOVOC (Web name); DefaultNumber (description); TLSContexts_DHKeySize (4096 removed); EnableMgmtTwoFactorAuthentication (removed); SIPTCPTimeout default); FakeTCPalias (web parameter); TrunkGroup_TrunkGroupNum (values); EnableCoreDump (default and no restart); ReliableConnectionPersistentMode (description); V1501SPRTPayloadTypeRx (ini); V1501SSEPayloadTypeRx (ini); Test_Call_PlayToneIndex (range); IpProfile_SBCRemoteReferBehavior (description); HeldTimeout (description); StaticRouteTable_PreferredSourceInterfaceName (removed); RadiusTrafficType (removed)
Miscellaneous: "Reset" button renamed "Restart"

28253

Updated to LTS Ver. 7.40A.250.528 (7.4.250-4)
Updated sections: Downloading the Debug (and Core Dump) File (client defaults file); Reporting Management User Activities (syslog format); Configuring Logging Filter Rules (syslog and log type); Configuring Ethernet Port Groups (REDUN_2RX_1TX and REDUN_2RX_2TX removed)
New parameters: WSTunInterfaceName
Updated parameters: RadiusLocalCacheTimeout (default); DisableRS232 (default); EtherGroupTable_Mode (REDUN_2RX_1TX and REDUN_2RX_2TX removed)

28254

Ver. 7.40A.260.152
Updated sections: Filtering IP Network Traces using Wireshark-Like Expressions (ip for all IPv4); Configuring WebSocket Tunnel with OVOC (cloud platforms); Configuring Proxy Sets (max. DNS-resolved)
Updated parameters: EnableDID; KeyCFDoNotDisturb; OSNAccessVlan (CLI path); OSNBlockPort (CLI path)

28255

Updated to LTS Ver. 7.40A.250.609 (7.4.250-5)
New sections: Reliable (TCP/TLS) Connections
New parameter: RegistrationSyncMode
Updated parameters: ReliableConnectionPersistentMode

28257

Updated to LR Ver. 7.40A.400.023 (7.4.400-01)
New sections: Monitoring IP Entities for Ethernet Port Redundancy; Running Multiple Non-Interactive SSH Commands from Command Line
Updated sections: Configuring SIP Recording Rules (SRS max) ; Configuring IP-to-Tel Routing Rules (max); Configuring Registration Accounts (max); Configuring a Description for Telephony Ports; Configuring Ethernet Port Groups (active port display); Enabling SSH for Public Key Authentication (Web path); Configuring Device for QoE Reporting to OVOC (no secondary address); Configuring SNMP Trap Destinations with IP Addresses (check box cleared); Configuring Wireshark Packet Capturing using RPCAP (recommendations)
New parameters: MSRPConnectionEstablishTimeout; EthPortGroupNetworkMonitor; EtherGroupTable_MonitorThreshold; SIPInterface_MSRPTCPPort; SIPInterface_MSRPTLSPort
Updated parameters: CpMediaRealm_TCPPortRangeStart (removed); CpMediaRealm_TCPPortRangeEnd (removed); MessagePolicy_MaxMessageLength (max); MessagePolicy_MaxHeaderLength (max); MessagePolicy_MaxBodyLength (max); MessagePolicy_MaxNumHeaders (max); MessagePolicy_MaxNumBodies (max); InvalidLoginReport; AccessList_Use_Specific_Interface (default); AccessList_PrefixLen (default); MgmtUseLocalUsersDatabase (web name); IPGroup_DedicatedConnectionMode (value name change); EtherGroupTable_Mode (REDUN_2RX_1TX and REDUN_2RX_2TX removed); RestCdrHttpServer (web name and row pointer); MgmntLDAPGroups_Group (case-insensitive); MgmntLDAPGroups_Level (note); IpProfile_SBCRemoteUpdateSupport (description option 3); IP2IPRouting_DestType (description for all users)

28258

Updated to LTS Ver. 7.40A.250.836 (7.4.250-7)
Updated sections: Configuring Firewall Rules (defaults changed prefix length); Configuring SIP Message Manipulation (max. header value length); Dial Plan Notations (wildcard)
New parameters: IpProfile_SBCPrecondition; ProxySet_PeerHostNameVerificationMode; [ProxySet_TLSRemoteSubjectName; Classification_TLSRemoteSubjectName
Updated parameters: AccessList_Use_Specific_Interface (default); AccessList_PrefixLen (default); ProxySet_EnableProxyKeepAlive (new option fake); CallSetupRules_AttributesToGet (max)

28259

Updated to LR Ver. 7.40A.400.063 (7.4.400-03) and LTS Ver. 7.40A.250.908 (7.4.250-8)
Updated sections: Three-Way Conferencing (max); Alternative Tel-to-IP Routing Based on SIP Responses (web path); Alternative Tel-to-IP Routing upon SIP 3xx with Multiple Contacts (web path); DHCP-based Provisioning (IPv4 and MAC)
New parameters: IPGroup_TeamsLocalMOSync
Updated parameters: ForkingDelayTimeForInvite (web parameter); AupdHttpUserAgent (FXS)

28260

Updated to LR Ver. 7.40A.500.010 (7.4.500)
New sections: Sending SIP INFO Messages with DTMF to SRS; Configuring Background Tones for SBC Calls
Updated sections: Downloading and Uploading the Configuration Package File; SIPREC SIP-based Media Recording (RTT); Customizing CDRs for Gateway Calls (Var.Call.Dst.UserDefined); CDR Field Description (Gateway field Var Call User Defined 1-5); Reporting Management User Activities (passwords hidden); Downloading and Uploading the Configuration Package File (7-Zip); Configuring SBC User Information Table through Web Interface (synchronization)
New parameters: FwdSignalingToSIPRec; HostName (CLI path); HeaderForTransfer; IpProfile_DisconnectOnBrokenConnection (reroute with original SIP headers)
Updated parameters: IPGroup_AuthenticationMode (description); WebUsers_SessionLimit (description); GWCDRFormat_FieldType (Var Call User Defined); RegistrationSyncMode (SBC User Information)

28261

Updated to LTS Ver. 7.40A.251.026 (7.4.250-9)
Updated sections: Configuring Management User Accounts (plain text passwords for shared settings); Configuring SNMP V3 Users (plain text passwords for shared settings)
New parameters: DisconnectSubscriptionsMode; LimitIncomingIcmpEchoRequests
Updated parameters: IPGroup_TeamsLocalMOSync (removed); Classification_TLSRemoteSubjectName (description); ProxySet_TLSRemoteSubjectName (description); ProxySet_PeerHostNameVerificationMode (description); ProxyIPListRefreshTime

28262

Updated sections: Configuring the Primary Syslog Server Address (VoIP Debug Level parameter); Configuring Table ini File Parameters ($$ removed)
Updated parameters: Account's Password (question mark); InboundMediaLatchMode (description strict)
Miscellaneous: ini prefix removed from parameters

28263

Updated to 7.40A.251.147 (7.4.250-10)
New parameters: CallInfoListMode
Updated parameters: EnableCoreDump (default); ClassificationFailureResponseType (CLI typo); EtherGroupTable_Mode (restrictions)

28265

Updated to 7.40A.500.357 (7.4.500-1)
New sections: Load Balancing SIPREC SRSs using IP Group Set; Configuring Voice Quality for Unregistered User
Updated sections: ICE for Media; Configuring SIP Recording Rules; Configuring Registered User Voice Quality (path to page); On-Demand SIPREC using SIP INFO Message (multiple IP Groups); Configuring Management User Accounts (folder access per user level)
New parameters: SRSIPGroupSetName; SwitchCoderUponVoiceQuality; DisconnectSubscriptionsMode
Updated parameters: SBCIceMode (Full); SIPConnect (description); DisconnectOnBrokenConnection; MSRPConnectionEstablishTimeout

28267

Updated to 7.40A.251.283 (7.4.250-11)
Updated sections: Configuring Management User Accounts ("New" user in CLI)
Updated parameters: EnableSIPRemoteReset (description); RetryAfterMode (CLI command)

28267

Updated to 7.40A.500.775 (7.4.500-2)
New section: Configuring Static ARP Table
Updated sections: Implementing ICE for Media Sessions (keepalive); Configuring Message Session Relay Protocol (enable); Configuring Maximum SBC Call Duration (Var.Call.Dst|Src.MaxDuration); Configuring Secondary Syslog Servers (Kafka); Configuring Test Call Endpoints (note re REST API); Examples of Call Setup Rules (Abort and destination tag); Configuring Call Setup Rules (Abort and destination tag); Configuring SBC IP-to-IP Routing Rules (PreRouteCallSetupRulesSetId); Configuring Management User Accounts (max. 10 sessions); Configuring a Hostname for Web Interface (recommended); Downloading and Uploading the Configuration Package File (CLI Startup Script); Capacity for Signaling, Media and User Registrations (URL link)
New parameters: EnableMSRP; VideoDiffServ; StaticArp; KeepInitialIncomingINVITE; PreRouteCallSetupRulesSetId; Topic (Syslog Servers table); 'Kafka Connection String' (Syslog Servers table)
Updated parameters: WebHostname (web name renamed 'Web Server Name'); ClassifyByProxySet (new value Enable for OPTIONS); LDAPAuthFilter (max. chars); 'Transport Protocol' (KAFKA value - Syslog Servers table); SystemLogSize (range and default); SBCEnforceMediaOrder (Web parameter added); HostHeaderProtection (removed); DNSrebindingProtectionEnabled (removed); HTTPSOnly (note re SSO OVOC); CmpFileURL (online); ; NoRTPDetectionTimeout (n/a MSRP note); DNSCache (description); ProxyIPListRefreshTime (DNS cache); DNSResolveMethod (DNS cache); ProxyIp_IpAddress (DNS cache)

28269

Updated to 7.40A.500.775 (7.4.250-14 / 7.4.250-13)
Updated sections: OAuth 2.0 Based SIP Message Authentication (path updated) Syslog Message Format (SUp/seq #); Configuring SIP Message Manipulation (max chars for condition); Downloading the Debug (and Core Dump) File (TAR file and licenses); Configuring Management User Accounts (New users and LDAP/RADIUS)
New parameters: LDAPAuthFilter ($ mandatory); SendAcSessionIDHeader (CLI send-acsessionid); LoggingFilters_FilterType (user is source and dest); BellModemTransportType (def); SBCPrecondition (notes re requirement); condition (max chars 200)
Updated parameters: UseWebLogo (CLI web-logo-enable); WebLogoText (CLI web-logo-text); SyslogLogLevel (return to default)

28270

Updated to 7.40A.600.014 (7.4.600)
New sections: Configuring Interval for QoE Report Collection and Generation
Updated sections: Viewing Default Certificate Authorities (updated list)
New parameters: QOEMediaStatisticTimer; InCallRouteMode (Proxy Set); ConnectionReuse (Proxy Set); NoRTPMode
Updated parameters: DNSResolveMethod (NAPTR behavior); FailedOptionsRetryTime (CLI command); CheckPasswordHistory (CLI command); NoRTPDetectionTimeout; UseSIPTgrp (new 5 and 6)

28271

Updated to 7.40A.501.141 (7.4.500-3)
Updated sections: Configuring SIP Response Codes for Alternative Routing Reasons (max. 4 proxies); Using Proprietary SIP X-AC-Action Header (supported SIP methods)
Updated parameters: IsProxyHotSwap (max. 4 proxies for alt)
New parameters: EnableHttpClientDbgMsg; HTTPLogFilter; InCallRouteMode (Proxy Set)
Updated parameters: InfoType (new Syslog value in Syslog Servers table); WSTunServer (FQDN)

28272

Updated to 7.40A.501.384 (7.4.500-4)
New sections: Starting and Stopping Debug Recording
Updated sections: Configuring Management Access List (table renamed / management interface type); Configuring Alarm Thresholds for Performance Monitoring (0 invalid for Clear Watermark)); Enabling LDAP-based User Login Authentication (note re both LDAP and RADIUS); RADIUS-based User Login Authentication (note re both LDAP and RADIUS); Configuring Firewall Rules (insert)
New parameters: EnableHttpClientDbgMsg; HTTPLogFilter; SBCWizardUrl; AupdMaxTransferTime; EnableSnmpAuthenticationTrap; DebugRecordingTimeout; DebugRecordingStatus
Updated parameters: Prefix2ExtLine (CLI command); DisableSNMP (description); CallSuccessSIPReasons (description); NoRTPMode (description); SNMPSysOid (removed); SNMPTrapEnterpriseOid (removed); V1501SSEPayloadTypeRx (removed); V1501SPRTPayloadTypeRx (removed); EnhancedFXSLineCurrent; EnableTrapezoidRing

28273

Updated to 7.40A.600.203 (7.4.600-1)
New sections: On-Demand SIPREC using SIP 200 OK Responses
Updated sections: SNMP-Based Management (64-bit counter); Configuring Message Session Relay Protocol (IPv6)
New parameters: ClassifyByRegDB; DisconnectInDialogSubscribeFailure; EnforceMediaOrder
Updated parameters: InCallRouteMode; NoRTPMode (note re outgoing leg); DisconnectOnBrokenConnection (note re outgoing leg)

28274

Updated to 7.40A.501.649 (SBC7.4.500-5)
New sections: Configuring Maximum Concurrent Calls per Specific User; Securing RADIUS Messages with Message-Authenticator Attribute; Terminating Ending Other Web Sessions of User
Updated sections: Configuring a Hostname for Accessing Web Interface (enforce hostname); Configuring CLI over SSH using Public Key Authentication (SHA2 note); Configuring Test Call Endpoints (incoming/outgoing); Configuring Basic Test Calls (note); Configuring Username and Password Complexity (regex, username, new parameters); Configuring Wireshark Packet Capturing using RPCAP (second port configurable); Displaying Login Information upon Login (no. current sessions); Viewing Currently Logged-In User Information (no. current sessions); Configuring Default DNS Servers (IPv6 servers); Configuring Wireshark Packet Capturing using RPCAP (note for media updated); SBC Manipulations (note ignores manipulation for IP2IP to IP2Tel)
New parameters: EnforceWebHostname; EnforceUsernameComplexity; PasswordComplexityCheckByRegex; UsernameComplexityCheckByRegex; DisconnectOnBrokenSignalingConnection (IP Profile); RadiusPapRequireMsgAuthTx; RadiusRequireMsgAuthRx; DefaultPrimaryDnsServerIpv6; DefaultSecondaryDnsServerIpv6; SDPSubsequentResponses (IP Profile); SrtpResetTxRxSeparately; ArpManagerTimeout
Updated parameters: dflt-dest-nb (typo CLI command); CallFailureSIPReasons (note); CallSuccessSIPReasons (note); AUPDMaxTransferTime (values); EnforceMediaOrder (CLI path changed); voice-IncrementalIniFileURL (CLI changed to incremental-ini-file); IniFileURL (CLI changed to ini-file); GenerateSRTPKeys (new value Keep Original); DedicatedConnectionMode (remove limitation re Proxy Set homing); LDAPDebugMode (max. value)