No Route to IP Group Alarm

acIpGroupNoRouteAlarm

Alarm

acIpGroupNoRouteAlarm

OID

1.3.6.1.4.1.5003.9.10.1.21.2.0.114

Description

The alarm is sent when the device rejects calls to the destination IP Group due to any of the following reasons:

■ Server-type IP Group is not associated with a Proxy Set, or it's associated with a Proxy Set that is not configured with any addresses, or the associated Proxy Set experiences a proxy keep-alive failure (Gateway and SBC)
■ Poor Voice Quality - MOS (SBC only)
■ Bandwidth threshold has been crossed (SBC only)
■ ASR threshold has been crossed (SBC only)
■ ACD threshold has been crossed (SBC only)
■ NER threshold has been crossed (SBC only)

Source Varbind Text

Board#1

The object for which the threshold is crossed according to one of the above-mentioned reasons. The text displayed for this alarm can be one of the following:

■ "No Working Proxy" (acProxyConnectivity trap is sent)
■ "Poor Quality of Experience"
■ "Bandwidth"
■ "ASR" (see acASRThresholdAlarm)
■ "ACD" (see acACDThresholdAlarm)
■ "NER" (see acNERThresholdAlarm)

Alarm Text

<Alarm Description Reason> as described above.

Event Type

Quality Of Service Alarm

Probable Cause

One of the reasons described above.

Severity

Condition

Text

Corrective Action

Major

When calls rejected to IP Group due to any of the above-mentioned reasons.

"IP Group is temporarily blocked.

IPGroup(<name>) Blocked Reason: <reason – see Source Varbind Text>"

-

Cleared

When calls are no longer rejected due to the above-mentioned reasons (i.e. when none of the above reasons prevent a route to the IP Group from being established).

 

-