Multiple SNMP Trap Destinations

An agent can send traps to up to five managers. For each manager you need to define the manager IP address and trap receiving port along with enabling the sending to that manager. You can also associate a trap destination with a specific SNMPv3 USM user. Traps are sent to this trap destination using the SNMPv3 format and the authentication and privacy protocol configured for that user.

To configure the Trap Managers table, use one of the following methods:

■

Web interface (refer to the device's User's Manual)

■

ini file (see Configuring Trap Managers via ini File)

■

SNMP (see Configuring Trap Managers via SNMP)