Configuring SNMP Connectivity
This template lets you configure an SNMP connectivity template whose parameter values can then be applied system-wide (globally). The template facilitates more effective network management. SNMP/HTTP templates are the default profile values for each defined tenant. There is a single default profile that is used for SNMP and HTTP and is applied to devices added to the Auto-detection region.
| ➢ | To configure an SNMP Connectivity template: |
| 1. | Access the Global scope (see Global and Tenant Scope). |
| 2. | Open the SNMP Connectivity screen (System > Configuration > Templates > SNMP Connectivity). |
| 3. | Use the following table as a reference to the parameters in the figure above. |
|
Parameter |
Description |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| SNMP v2 | ||||||||||
|
SNMP Read Community |
Enter an encrypted SNMP read community string. The default value for the SNMP read community string is 'public'. |
|||||||||
|
SNMP Write Community |
Enter an encrypted SNMP write community string. The default value for the SNMP write community string is 'private'. |
|||||||||
|
SNMP Trap Community |
Enter the Trap Community string to be received as part of the Notification message. |
|||||||||
| SNMP v3 | ||||||||||
|
Security Name |
Enter a name for SNMP v3. Example: OVOC User. |
|||||||||
|
Security Level |
From the drop-down, select either:
|
|||||||||
|
Authentication Protocol |
From the drop-down, select either:
|
|||||||||
|
Authentication Key |
Enter an Authentication Key. Default: 123456789. |
|||||||||
|
Privacy Protocol |
From the drop-down, select either:
|
|||||||||
|
Privacy Key |
Enter a Privacy Key. Default: 123456789. |
|||||||||
| 4. | Click Submit. |