Introduction

This part describes the commands located on the Network configuration level. The commands of this level are accessed by entering the following command at the root prompt:

# configure network
(config-network)#

This level includes the following commands:

Command	Description
access-list	See access-list
bind vrf	See bind vrf
dns	See dns
interface	See interface
nat-translation	See nat-translation
network-settings	See network-settings
nqm	See nqm
physical-port	See physical-port
poe-table	See poe-table
qos	See qos
sctp	See sctp
security-settings	See security-settings
tftp-server	See tftp-server
tls	See tls

Command Mode

Privileged User