hw

This command configures hardware-related settings.

Syntax

(config-system)# hw
(hw)# 

Command	Description
disable-internal-lte-modem {off|on}	Enables (off) or disables (on) the device's integrated (internal) LTE modem. Note: ■ For the parameter to take effect, a device reset is required. ■ For the device to operate with the Mediant 5G-EA cellular module, you must disable the LTE modem.
dual-powersupply-supported {no|yes}	Enables the device to send an SNMP alarm (acPowerSupplyAlarm) for one or both Power Supply modules if a module is removed from the chassis or not operating correctly (failure). Note: The command is applicable only to Mediant 800.
usb-power {off|on}	Shuts down (off) the USB port, by disconnecting power to the port.

Command Mode

Privileged User

Example

This example enables sending an alarm if a Power Supply module is removed or fails.

(config-system)# hw
(hw)# dual-powersupply-supported yes