Configuring TR-069

The CWMP/TR-069 Settings page is used to enable and configure TR-069.

● For a detailed description of all the CWMP/TR-069 parameters, see TR-069 Parameters.
● For a detailed description of the CPE WAN Management Protocol data models, refer to the TR-069 CWMP for Mediant MSBR Reference Guide.
➢ To configure TR-069:
1. Open the CWMP/TR-069 Settings page (Setup menu > IP Network tab > TR-069 (CWMP)):

2. From the 'TR-069' drop-down list, select Enable to enable TR-069 functionality.
3. From the 'Data Model' drop-down list, select the TR-069 data model.
4. Configure the other TR-069 parameters as required. For a description of the parameters, see TR-069 Parameters.
5. Click Apply, and then reset the device with a burn-to-flash for your settings to take effect.