Resetting an Analog Channel

You can reset an analog (FXO or FXS) channel by disconnecting the current call (if exists). This is sometimes useful, for example, when the device (FXO) is connected to a PBX and communication between the two cannot be disconnected (e.g., when using reverse polarity).

➢

To reset an analog channel through the Web interface:

1.

Open the Monitor home page (Monitor menu > ).

2.

Click the required FXS or FXO port icon; a shortcut menu appears.

3.

From the shortcut menu, choose Reset Channel; a message appears informing you when the channel has reset.

4.

Click the required port icon.

5.

Click the Reset Port button; a message appears informing you that the port has successfully reset.