Activating Zero Configuration
The following procedure describes how to set up and activate Zero Configuration.
|
➢
|
To set up and activate Zero Configuration: |
|
1.
|
Create the CLI or ini configuration file, and then publish it on an HTTP/S provisioning server. |
|
2.
|
Connect to AudioCodes Redirect server and then configure the following: |
|
●
|
MAC address of the device(s) that you want to service. |
|
●
|
URL of the configuration file created in Step 1. |
For information on the Redirect server management interface, see Working with the Redirect Server.
|
3.
|
Make sure that the network in which the device is deployed has a functioning DHCP server and allows access to the Internet. |
|
4.
|
Connect the Ethernet cable to the device’s WAN interface. |