Configuring SIP User Part for SRS
You can configure the SIP user part of the Request-URI for the recording server (SRS). The device inserts this user part in the SIP To header of the INVITE message sent to the SRS.
|
➢
|
To configure the SIP user part for SRS: |
|
1.
|
Open the SIP Recording Settings page (Setup menu > Signaling & Media tab > SIP Recording folder > SIP Recording Settings). |
|
2.
|
In the 'Recording Server (SRS) Destination Username' field, enter a user part value (string of up to 50 characters). |