Remote SNMP Management
The following procedure describes how to enable remote SNMP-based management from the WAN.
|
➢
|
To enable remote SNMP management from WAN: |
|
a.
|
Open the SNMP Settings page (Setup menu > Administration tab > SNMP folder > SNMP Settings). |
|
b.
|
From the 'Allow WAN access to SNMP’ drop-down list, select Enable: |
|
c.
|
Click Apply, and then reset the device with a burn-to-flash for your settings to take effect. |
|
a.
|
Access the System configuration mode: |
# configure system
|
b.
|
Enable SNMP management from the WAN: |
(config-system)# snmp settings
(snmp)# wan-snmp-allow on
(snmp)# exit
(config-system)# exit