UA-Profile Events Subscription Parameters

The UA-Profile events subscription parameters are described in the table below.

UA-Profile Events Subscription Parameters

Parameter

Description

‘Subscribe to UA-Profile’

configure voip > gateway dtmf-supp-service supp-service-settings > subscribe-to-ua-profile

[EnableUaProfileSubscription]

Enables subscription to UA-Profile events (services), by sending SIP SUBSCRIBE requests.

■ [0] No(default)
■ [1] Yes

Note:

■ The parameter is applicable only to the Gateway application.
■ For more information on UA-Profile subscription, see Configuring Subscription to UA Profile Events.

‘UA-Profile Subscribe Expiration Time‘

configure voip > gateway dtmf-supp-service supp-service-settings > ua-profile-subs-expr-time

[UaProfileExpirationTime]

Defines the UA-Profile service subscription expiration time (in seconds). When the subscription expires, the device sends another SIP SUBSCRIBE request.

The valid value is 10 to 15,500,000. The default is 7200 (i.e., 2 hours).

‘UA-Profile Server IP Address’

configure voip > gateway dtmf-supp-service supp-service-settings > ua-profile-srvr-ip-addr

[UaProfileServerIP]

Defines the address of the UA-Profile server.

The valid value is an IP address (IPv4 or IPv6) or FQDN (domain name).

‘UA-Profile Subscribe IP Group'

configure voip > gateway dtmf-supp-service supp-service-settings > ua-profile-subs-ipgroupid

[UAProfileSubscribeIPGroupID]

Defines the UA-Profile server as an IP Group (configured in the IP Groups table).

By default, no value is configured.

Note:

■ You can configure the address of the UA-Profile server by IP address ('UaProfile Server IP Address' parameter) or by IP Group ('UaProfile IP Group ID' parameter). If you've configured both, the device always tries to use the IP Group. Only if the IP Group fails, does the device use the IP address.
■ To configure IP Groups, see Configuring IP Groups.

‘UA-Profile Server Transport Type’

configure voip > gateway dtmf-supp-service supp-service-settings > ua-profile-srvr-transp-type

[UaProfileServerTransportType]

Defines the transport protocol for sending SIP SUBSCRIBE requests to the UA-Profile server.

■ [-1] Not Configured (default)
■ [0] UDP
■ [1] TCP
■ [2] TLS

Note: When set to ‘Not Configured’, the value of the parameter [SIPTransportType] is used.