ethernet-group-network-monitor-peers-status

This command displays the reachability status of a specific destination in the Ethernet Port Group Network Monitor Peers Status table, per monitored row in the Ethernet Port Group Network Monitor table.

Syntax

(config-network)# eth-group-network-monitor <Index>
(eth-group-network-monitor-<Index>)# ethernet-group-network-monitor-peers-status <Index>
(ethernet-group-network-monitor-peers-status-<Index>/<Index>)# display

Command Mode

Privileged User

Note

The command is applicable only to MP-1288 and Mediant 3100.

Example

This example displays the reachability status of a destination of monitored row index 3:

(config-network)#  eth-group-network-monitor 3
(eth-group-network-monitor-3)# ethernet-group-network-monitor-peers-status 0
(ethernet-group-network-monitor-peers-status-3/0)# display
peer-dest-address (1.7.0.7)
is-peer-reachable (Reachability unverified)
ping-loss-percentage (100)