show network arp

This command displays the device's ARP entries. The 'Type' column in the command's output displays static ARP mappings as "permanent" and dynamic ARP mappings as "reachable".

Syntax

show network arp 

Command Mode

Basic and Privileged User

Related Commands

static-arp-table - Defines the Static ARP table.

Example

show network arp
IP Address   MAC Address           Eth Device    Type
10.15.0.1      00:1c:7f:3f:a9:5d      vlan 1              reachable
10.15.2.1      00:1b:17:00:02:40    vlan 2               permanent
 
End of ARP table (2 entries displayed _