snmp trap
This command configures SNMP traps.
Syntax
(config-system)# snmp trap (snmp-trap)#
|
Command |
Description |
|---|---|
|
auto-send-keep-alive {disable|enable} |
Invokes a keep-alive trap and sends it every 9/10 of the time configured by the parameter NatBindingDefaultTimeout. |
|
community-string |
Defines the community string used in traps. |
|
manager-host-name |
Defines the FQDN for IPv4 address resolution of the remote host that is used as an SNMP Trap Manager. |
|
manager-ipv6-host-name |
Defines the FQDN for IPv6 address resolution of the remote host that is used as an SNMP Trap Manager. |
|
reset-community-string |
Returns to the default trap community string. |
Command Mode
Privileged User
Example
This example configures the IPv4 FQDN of the remote host used as the SNMP Trap Manager:
(config-system)# snmp trap (snmp-trap)# manager-host-name John