sctp
This command configures Stream Control Transmission Protocol (SCTP) settings.
Syntax
(config-network)# sctp
(sctp)#
|
Command |
Description |
|---|---|
|
heartbeat-interval |
Defines the SCTP heartbeat Interval (in seconds), where a heartbeat is sent to an idle destination to monitor reachability every time the interval expires. |
|
initial-rto |
Defines the initial retransmission timeout (RTO) in msec for all the destination addresses of the peer. |
|
max-association-retransmit |
Defines the maximum number of consecutive association retransmissions before the peer is considered unreachable and the association is closed. |
|
max-data-chunks-before-sack |
Defines after how many received packets is Selective Acknowledgement (SACK) sent. |
|
max-data-tx-burst |
Defines the maximum number of DATA chunks (packets) that can be transmitted at one time (in a burst). |
|
max-path-retransmit |
Defines the maximum number of path retransmissions per remote transport address before it is considered as inactive. |
|
maximum-rto |
Defines the maximum retransmission timeout (RTO) in msec for all the destination addresses of the peer. |
|
minimum-rto |
Defines the minimum retransmission timeout (RTO) in msec for all the destination addresses of the peer. |
|
timeout-before-sack |
Defines the timeout (msec) since the packet was received after which SACK is sent (i.e., delayed SACK). |
Command Mode
Privileged User
Note
SCTP is applicable only to Mediant 90xx and Mediant Software.
Related Commands
show sctp
Example
This example configures the SCTP heartbeat interval to 60 seconds:
(config-network)# sctp
(sctp)# heartbeat-interval 60