sdr-server

This command configures the SBC SDR Remote Servers table, which configures remote SFTP servers to where the device sends the locally stored SDR files.

Syntax

(config-troubleshoot)# sdr-server
(sdr-server-<Index>)#

Command	Value
Index	Defines the table row index.
address	Defines the address of the server.
connect-timeout <1-600>	Defines the connection timeout (in seconds) with the server.
interface-name	Assigns an IP Interface.
max-transfer-time <1-65535>	Defines the maximum time (in seconds) allowed to spend for each individual file transfer process.
name	Defines an arbitrary name to easily identify the rule.
password	Defines the password for authentication with the server.
port	Defines the SSH port number of the server.
priority <0-10>	Defines the priority of the server.
remote-path	Defines the directory path to the folder on the server where you want the files to be sent.
username	Defines the username for authentication with the server.

Command Mode

Privileged User

Example

This example configures an SFTP server at index 0:

(config-troubleshoot)# sdr-server 0
(sdr-server-0)# name SDR-Server
(sdr-server-0)# address 170.10.2.5
(sdr-server-0)# interface-name OAMP
(sdr-server-0)# password 1234
(sdr-server-0)# username sftp-my
(sdr-server-0)# remote-path /sdr
(sdr-server-0)# activate