Desktop Mounting

The device can be mounted on a desktop by attaching the four anti-slide bumpers (supplied) to the underside of the device. Once you have attached these bumpers, simply place it on a desktop in the desired position.

➢

To attach the anti-slide rubber bumpers to the device:

1.

Flip the device over so that its underside faces up.

2.

Locate the four anti-slide grooves on the underside -- one on each corner.

Rubber Feet Locations

3.

Peel off the adhesive, anti-slide rubber feet (supplied) and stick one in each anti-slide groove.

4.

Flip the device over again so that it rests on its underside with the rubber feet in contact with the surface.