Connecting a USB Storage Device
The device supports USB storage capabilities, using an external USB hard drive or flash disk (disk on key) connected to the device's USB port. The storage capabilities are configured through CLI and include the following:
|
■
|
Updating the device's firmware or configuration from USB |
|
■
|
Saving the current configuration to USB as a backup |
|
■
|
Saving network captures to USB |
|
➢
|
To connect the USB storage device: |
|
■
|
Connect your USB storage device to the USB port, located on the front panel. |
Connecting USB Storage Device
Only a single USB storage (formatted to FAT/FAT32) operation is supported at any given time.