Front Panel Description

The device's front panel is shown in the following figure and described in the subsequent table.

Front Panel

Front Panel Description

Item #

Label

Description

1

USB 2.0 Type-A port, which can be used for storage capabilities using an external USB hard drive or flash disk (disk on key).

2

PWR, FAN, SYS, TEL, BITS, HA

Front-panel LEDs. For more information, see LED Descriptions.

Note: The BITS and HA LEDs are currently not used (for future support).

3

RST

Reset pinhole button for resetting the device and restoring it to factory defaults:

■ To reset the device: Using a paper clip or any other similar pointed object, press and hold down the button for at least 2 seconds (but no more than 10 seconds).
■ To restore the device to factory defaults: Using a paper clip or any other similar pointed object, press down the button for at least 15 seconds (but not longer than 25 seconds).

4

CONSOLE

RS-232 serial port (RJ-45) for connecting to the device's Command-Line Interface (CLI).

5

-

Fan Tray and Fan Filter cover. For more information, see Fan Tray Description.