Using Mounting Brackets

The procedure below describes how to mount the device in a 19-inch rack. Rack mounting involves placing the device on a pre-installed rack shelf (not supplied) and then securing the device to the rack frame using mounting brackets (supplied).

Mounting Brackets

➢

To mount the device in a 19-inch rack using mounting brackets:

1.

Attach the two mounting brackets (supplied) to each side of the device's chassis, using the supplied screws, as shown in the following figure:

Attaching the Mounting Brackets

2.

Place the device on a pre-installed shelf in the rack.

3.

Attach the ends of the mounting brackets (that you installed in Step 1) to the vertical track of the rack's frame, using standard 19-inch rack bolts (not supplied).