Displaying Login Information upon Login

You can enable the device to display login information each time you log in to the device's Web interface. This information is displayed in the pop-up Login Information window, as shown in the example below. To close the window, click Close.

The window displays the following information:

Field

Description

'Last Login User Level'

The user level (e.g., Security Administrator) of the user that was last logged in to the Web interface.

'Last Failed Login Time'

The time of the last failed login attempt.

'Last Failed Login Date'

The date of the last failed login attempt.

'Last Failed Login IP Address'

The remote management (client) station's IP address of the last failed login attempt.

'Login Attempts Since Last Successful Login'

The number of failed login attempts since the last successful login.

'Last Successful Login Time'

The time of the last successful login attempt.

'Last Successful Login Date'

The date of the last successful login attempt.

'Last Successful Login IP'

The remote management (client) station's IP address of the last successful login attempt.

'Number of Other Active Sessions'

The number of currently established Web sessions of this same user (e.g., "John") with the same user level (e.g., Security Administrator). A value of "0" (zero) means that there are no other such Web sessions.

Note: If there are other active sessions, you can end them, as described in Terminating Other Web Sessions of User.
➢ To enable display of user login information upon login:
1. Open the Web Settings page (Setup menu > Administration tab > Web & CLI folder > Web Settings).
2. Under the Security group, from the 'Display Last Login Information' drop-down list, select Enable:

3. Click Apply.