OCSP Parameters
The Online Certificate Status Protocol (OCSP) parameters are described in the table below.
OCSP Parameters
|
Parameter |
Description |
||||||
|---|---|---|---|---|---|---|---|
|
'Enable OCSP Server' configure network > ocsp > enable [OCSPEnable] |
Enables or disables certificate checking using OCSP.
For a description of OCSP, see Configuring Certificate Revocation Checking (OCSP). |
||||||
|
'Primary Server IP' configure network > ocsp > server-ip [OCSPServerIP] |
Defines the IP address of the OCSP server. The default IP address is 0.0.0.0. |
||||||
|
'Secondary Server IP' configure network > ocsp > secondary-server-ip [OCSPSecondaryServerIP] |
Defines the IP address (in dotted-decimal notation) of the secondary OCSP server (optional). The default IP address is 0.0.0.0. |
||||||
|
'Server Port' configure network > ocsp > server-port [OCSPServerPort] |
Defines the OCSP server's TCP port number. The default port number is 2560. |
||||||
|
'Default Response When Server Unreachable' configure network > ocsp > default-response [OCSPDefaultResponse] |
Determines whether the device allows or rejects peer certificates when the OCSP server cannot be contacted.
|