Network Port Assignment
The following table lists the device's network port assignments. This table also shows whether these ports are enabled or disabled by default and how to configure them. For ports that you do not need in your deployment but that are enabled by default, it's highly recommended that you disable them for security reasons.
For increased security against attacks, it's highly recommended to change the default port numbers (especially for the SIP application).
Network Port Assignments
Interface Type |
Application |
Protocol |
Port |
Default |
Port Configuration |
|||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
OAMP |
SSH server |
TCP |
22 |
Enabled |
|
|||||||||||||||||
Telnet server |
TCP |
23 |
Disabled |
|
||||||||||||||||||
Web server |
TCP |
80 |
Enabled |
|
||||||||||||||||||
Web server |
TCP |
443 |
Enabled |
|
||||||||||||||||||
SNMP server (GET / SET) and client (trap sender) |
UDP |
161 |
Enabled |
|
||||||||||||||||||
Any |
DHCP server |
UDP |
67 |
Disabled |
|
|||||||||||||||||
Control
|
SIP traffic |
UDP / TCP |
5060 |
Enabled |
|
|||||||||||||||||
SIPS traffic |
TCP |
5061 |
Enabled |
|
||||||||||||||||||
SIP over WebSocket (e.g., WebRTC) |
TCP |
443 |
Enabled |
|
||||||||||||||||||
Media |
Media traffic (RTP, RTCP, T.38) |
UDP |
6000-65535 |
Enabled |
|
|||||||||||||||||
Maintenance (HA) |
HA status |
UDP |
669 |
Disabled |
Note: Applicable to the following:
|
|||||||||||||||||
HA keep-alive |
UDP |
680 |
Disabled |
Note: Applicable to the following:
|
||||||||||||||||||
HA file sync |
TCP |
80 |
Disabled |
Note: Applicable to the following:
|
||||||||||||||||||
HA data sync |
TCP |
2442 |
Disabled |
Note: Applicable to the following:
|
||||||||||||||||||
Cluster |
Cluster control |
TCP |
2424 |
Disabled |
|
|||||||||||||||||
Cluster keep-alive |
UDP |
3900 |
Disabled |
Note: Applicable to the following:
|