Secure HTTP Access using HTTPS
It's recommended to allow access to the Web interface through HTTPS only. In addition, it's recommended to block port 80. This is done on, by configuring the 'Secured Web Connection (HTTPS)' parameter to HTTPS Only (reset device for setting to take effect):
| ➢ | To allow Web access only through HTTPS: |
| 1. | Open the Web Settings page (Setup menu > Administration tab > WEB & CLI folder > Web Settings). |
| 2. | From the 'Secured Web Connection (HTTPS)' drop-down list, select HTTPS Only: |
Securing Access to Web Interface using HTTPS
