Introduction

This document describes the SIP message syntax that is used for the following configuration tables:

Configuration Tables and Relevant Fields

Table

Fields

Message Manipulations Table

■

'Message Type'

■

'Condition'

■

'Action Subject'

■

'Action Type'

■

'Action Value'

Message Conditions Table

■

'Condition'

Pre-Parsing Manipulation Table

■

'Message Type'

■

'Pattern'

■

'Replace-With'

Call Setup Rules Table

■

'Condition'

■

'Action Subject'

■

'Action Type'

■

'Action Value'

For hybrid SBC-Gateway products: If you have configured call routing from the device's SBC application (IP-to-IP routing) to the device's Gateway application for IP-to-Tel routing, the device uses the initial SIP message as if it's a new call. Therefore, if any manipulations were done on the SIP message by the SBC application, the device ignores them.