Notice
Information contained in this document is believed to be accurate and reliable at the time of printing. However, due to ongoing product improvements and revisions, AudioCodes cannot guarantee accuracy of printed material after the Date Published nor can it accept responsibility for errors or omissions.
This document is subject to change without notice.
Date Published: December-12-2024
WEEE EU Directive
Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed of with unsorted waste. Please contact your local recycling authority for disposal of this product.
Security Vulnerabilities
All security vulnerabilities should be reported to vulnerability@audiocodes.com.
Customer Support
Customer technical support and services are provided by AudioCodes or by an authorized AudioCodes Service Partner. For more information on how to buy technical support for AudioCodes products and for contact information, please visit our website at https://www.audiocodes.com/services-support/maintenance-and-support.
Documentation Feedback
AudioCodes continually strives to produce high quality documentation. If you have any comments (suggestions or errors) regarding this document, please fill out the Documentation Feedback form on our website at https://online.audiocodes.com/documentation-feedback.
Stay in the Loop with AudioCodes
Related Documentation
|
---|
Document Revision Record
LTRT |
Description |
---|---|
29049 |
Initial document release for Version 7.4 |
29051 |
Typo in HTTP POST and GET Requests |
29053 |
Max. characters and note for registered user variables |
29055 |
Body part header manipulation added |
29057 |
Typo in Message Type description |
29058 |
Typo in regex detailed example; var.call.src|dst.TenantId added |
29060 |
New SDP parameters (param.message.sdp.originusername / param.message.sdp.ip-for-url); param.message.sdp.address replaced by param.message.sdp.ip |
29063 |
Call.key added; UUID-Generate added; ReferredByTags added; IP Group parameter syntax updated |
29064 |
Updated to Ver. 7.40A.300 (Func.Encrypt; Func.Decrypt) |
29065 |
IP Groups table parameter syntax param.ipg.dst|src updated |
29066 |
Updated to Ver. 7.40A.500; max. specific unknown headers; Var.Call.Dst|Src.PlayBackgroundTone; call Variable for CDR value from SIP header (Gateway) |
29067 |
Message normalization re URL updated; typo for "header.from.user" and "header.p-asserted-id.host" |
29068 |
Updated to 7.4.500-2 (Call Variable for Maximum Call Duration) |
29070 |
Updated to 7.4.600; logical operators AND and OR for Condition updated; max. sub-variables per rule increased to 15 (only Mediant Software 8 GB and higher); numerical comparisons for conditions using 'num' |
29071 |
Supported SIP methods for X-AC-Action header |
29072 |
Authorization header added to Detailed Header Syntax section; example of Allow header added to 'Header Examples' section. |
29703 |
Updated to 7.4.500-5; 'cac' tag; update to rand.number/rand.string syntax; note re SBC manipulation ignored when routed to Gateway application |