e1-t1
This command configures E1/T1 interfaces.
Syntax
(config-voip)# interface e1-t1 <Slot (Module)/Port> (e1-t1 <Slot/Port>)#
|
Command |
Description |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
b-ch-negotiation |
ISDN B-Channel negotiation mode |
|||||||||
|
b-channel-nego-for-trunk |
ISDN B-Channel negotiation mode for trunk. |
|||||||||
|
call-re-rte-mode |
Call Rerouting Mode for Trunk. |
|||||||||
|
cas-channel-index |
Defines the CAS Protocol Table index per channel. |
|||||||||
|
cas-delimiters-types |
Defines the digits string delimiter padding usage for the specific trunk. |
|||||||||
|
cas-dial-plan-name |
Defines the Dial Plan name that will be used on the specific trunk. |
|||||||||
|
cas-table-index |
Indicates the CAS Protocol file to be used on the specific Trunk. |
|||||||||
|
clock-master |
Defines the trunk clock source. |
|||||||||
|
clock-priority |
Defines the trunk priority for auto-clock fallback. |
|||||||||
|
dig-oos-behavior |
Defines Digital OOS Behavior |
|||||||||
|
framing |
Defines the physical framing method to be used for this trunk. |
|||||||||
|
isdn-bits-cc-behavior |
Defines the ISDN Call Control Layer (Layer 4) behavior options. |
|||||||||
|
isdn-bits-incoming-calls-behavior |
Defines the ISDN incoming calls behavior options. |
|||||||||
|
isdn-bits-ns-behavior |
Defines the ISDN Network Layer (Layer 3) behavior options. |
|||||||||
|
isdn-bits-ns-extension-behavior |
Sets additional ISDN Network Layer (Layer 3) behavior options. |
|||||||||
|
isdn-bits-outgoing-calls-behavior |
Sets the ISDN outgoing calls behavior options. |
|||||||||
|
isdn-channel-id-format-for-trunk |
Defines the channel number format (number or slotmap) in the Channel Identification IE when sending Q.931 ISDN messages, per trunk. |
|||||||||
|
isdn-japan-ntt-timer-t305 |
Defines a timeout (in seconds) that the device waits before sending an ISDN Release message after it has sent a Disconnect message, if no SIP message (e.g., 4xx response) is received within the timeout. |
|||||||||
|
isdn-nfas-dchannel-type |
Defines the ISDN NFAS D-channel type. |
|||||||||
|
isdn-nfas-group-number |
Defines the group number of the ISDN NFAS group. |
|||||||||
|
isdn-nfas-interface-id |
Defines the ISDN NFAS Interface ID. Applicable only if the NS_EXPLICIT_INTERFACE_ID behavior bit is set. |
|||||||||
|
isdn-termination-side |
Defines the ISDN termination side. |
|||||||||
|
isdn-xfer-cab |
Send transfer capability to ISDN side on setup message. |
|||||||||
|
line-build-out-loss |
Defines the line build out loss to be used for this trunk. |
|||||||||
|
line-build-out-overwrite |
Overwrites the Framer's XPM register values which control the line pulse shape. |
|||||||||
|
line-build-out-xpm0 |
Controls the Framer's XPM0 register value (line pulse shape control). |
|||||||||
|
line-build-out-xpm1 |
Defines the Framer's XPM1 register value (line pulse shape control). |
|||||||||
|
line-build-out-xpm2 |
Defines the Framer's XPM2 register value (line pulse shape control). |
|||||||||
|
line-code |
Defines the line code type to be used for this trunk. |
|||||||||
|
local-isdn-rbt-src |
If the ringback tone source is not IP, who should supply the Ringback tone. |
|||||||||
|
ovrlp-rcving-type |
Defines reception type of overlap dialing from ISDN side |
|||||||||
|
pi-in-rx-disc-msg |
Configure PIForDisconnectMsg in order to overwrite PI value received in ISDN Disconnect message |
|||||||||
|
pi-location-to-isdn {not-included|user|private-net-serving-local-user|public-net-serving-local-user|transit|public-net-serving-remote-user|private-net-serving-remote-user|international|bewond-interworking} |
Defines the Location value (overwrites original) in the Progress Indicator information element (IE) for Q.931 messages that the device sends to the Tel side. |
|||||||||
|
pi-to-isdn |
Override the value of progress indicator to ISDN side in ALERT, PROGRESS, and PROCEEDING messages |
|||||||||
|
play-rbt-to-trk |
Enable ringback tone playing towards trunk side. Refer to User's Manual for details |
|||||||||
|
protocol |
Defines the PSTN protocol to be used for this trunk. |
|||||||||
|
pstn-alrt-timeout |
Defines max. time (in seconds) to wait for connect from PSTN |
|||||||||
|
rmv-calling-name |
Removes Calling Name For Trunk. |
|||||||||
|
trace-level {full-isdn| full-isdn-with-duplications| layer3| layer3-no-duplications| no-trace| q921-raw-data| q931| q931-q921-raw-data| q931-raw-data} |
Defines the PSTN trace level. Note:
|
|||||||||
|
trk-xfer-mode-type |
Defines the type of transfer the PSTN/PBX supports |
Command Mode
Privileged User
Example
This example configures E1/T1 to E1 EURO ISDN protocol type (1):
(config-voip)# interface e1-t1 1/1 (e1-t1 1/1)# protocol 1 (e1-t1 1/1)# activate