http-services
This command configures Web (HTTP) services.
Syntax
(config-system)# http-services (http-client-services)#
|
Command |
Description |
|---|---|
|
http-remote-services |
Defines the HTTP Remote Services table for REST. For more information, see http-remote-services. |
|
remote-monitoring {off|on} |
Enables the device to send monitoring reports to a remote monitoring server when the device is located behind NAT. |
|
remote-monitor-alarms |
Enables the device to send a remote monitoring report of currently active alarms to the monitoring server. |
|
remote-monitor-kpi |
Enables the device to send a remote monitoring report of performance monitoring statistics to the monitoring server. |
|
remote-monitor-registration |
Enables the device to send a remote monitoring report of users registered with the device to the monitoring server. |
|
remote-monitor-reporting-period |
Defines the time interval (in seconds) between each remote monitoring report that is sent to the monitoring server. |
|
remote-monitor-status |
Enables the device to send a remote monitoring report of its status to the monitoring server. |
|
rest-debug-mode {0-3} |
Defines the level of debug messages of HTTP services, which are sent to Syslog. 0 blocks all messages; 3 is the most detailed level. |
|
routing-qos-status {disable|enable} |
Enables QoS-based routing by the routing server. |
|
routing-qos-status-rate |
Defines the rate (in sec) at which the device sends QoS reports to the routing server. |
|
routing-server-group-status {disable|enable} |
Enables the reporting of the device's topology status (using the REST TopologyStatus API command) to HTTP remote hosts. |
|
routing-server-registration-status |
Enables the synchronization of the device's registration database with remote HTTP hosts. |
Command Mode
Privileged User