ip-group

Defines the table row index.

Defines the Request-URI host name in outgoing INVITE messages.

Enables the device to always send SIP requests and responses, within a SIP dialog, to the source IP address received in the previous SIP message packet.

Defines SIP methods received from the IP Group that must be challenged by the device when the device acts as an Authentication server.

Defines the authentication mode.

Assigns a Bandwidth Profile rule.

Assigns a Call Admission Control Profile.

Assigns a Call Setup Rule Set ID.

Enables classification of incoming SIP dialogs (INVITEs) to Server-type IP Groups based on Proxy Set (assigned using the IPGroup_ProxySetName parameter).

Defines the user part of the From, To, and Contact headers of SIP REGISTER messages, and the user part of the Contact header of INVITE messages received from this IP Group and forwarded by the device to another IP Group.

Defines the SIP header in the incoming INVITE to use as a call matching characteristic based on destination URIs.

Assigns a TLS Context (certificate) to the IP Group, which is used for DTLS sessions (handshakes) with the IP Group.

Assigns a Message Manipulation Set (rule) to the IP Group for SIP message manipulation on the inbound leg.

Assigns an "internal" Media Realm to the IP Group. This is applicable when the device is deployed in a Microsoft Teams environment. The device selects this Media Realm (instead of the Media Realm assigned by the media-realm-name command) if the value of the X-MS-UserLocation header in the incoming SIP message is "Internal" and the teams-local-media-optimization-handling command is configured to any value other than none.

Assigns an IP Profile to the IP Group.

Defines the host name (string) that the device uses in the SIP message's Via and Contact headers.

Defines the maximum number of users in this IP Group that can register with the device.

Assigns a Media Realm to the IP Group.

Defines a value for the SIP user part that can be used in Message Manipulation rules configured in the Message Manipulations table.

Defines a value for the SIP user part that can be used in Message Manipulation rules configured in the Message Manipulations table.

Defines a descriptive name, which is used when associating the row in other tables.

Assigns a Message Manipulation Set (rule) to the IP Group for SIP message manipulation on the outbound leg.

Defines the shared password for authenticating the IP Group, when the device acts as an Authentication server.

Enables the device to apply certain IP Group settings to keep-alive SIP OPTIONS messages that are sent by the device to the proxy server.

Assigns a Proxy Set to the IP Group. All INVITE messages destined to the IP Group are sent to the IP address configured for the Proxy Set.

Assigns a Quality of Experience Profile rule.

Defines the routing mode after a call redirection (i.e., a 3xx SIP response is received) or transfer (i.e., a SIP REFER request is received).

Defines the registration mode for the IP Group.

Assigns an Alternative Reasons Set to the IP Group.

Defines call forking of INVITE messages to up to five separate SIP outgoing legs for User-type IP Groups.

Assigns a Dial Plan to the IP Group.

Enables the device to use the same call identification (SIP Call-ID header value) received in incoming messages for the call identification in outgoing messages.

Defines the device's operational mode for the IP Group.

Enables E9-1-1 emergency call routing in a Microsoft Skype for Business environment.

Defines the authentication method when the device, as an Authentication server, authenticates SIP requests from the IP Group.

Enables SBC user registration "stickiness" to a registrar.

Defines the IP Group as a registered server that represents multiple users.

Defines the SIP Request-URI host name in INVITE and REGISTER messages sent to the IP Group, or the host name in the From header of INVITE messages received from the IP Group.

Defines the hostname of the URI in certain SIP headers, overwriting the original host part of the URI.

Defines the SIP header in the incoming INVITE that is used for call matching characteristics based on source URIs.

Assigns an SRD to the IP Group.

Assigns Dial Plan tags for routing and manipulation.

Enables the device to include Microsoft's proprietary X-MS-SBC header in outgoing SIP INVITE and OPTIONS messages in a Microsoft Teams Direct Routing environment.

Enables and defines media optimization handling when the device is deployed in a Microsoft Teams environment. The handling is based on Microsoft proprietary SIP headers, X-MS-UserLocation and X-MS-MediaPath.

Defines how the central SBC device (proxy SBC scenario) initially sends the received INVITE message with the SDP Offer to Teams when the device is deployed in a Microsoft Teams environment for Media Optimization.

Defines the display location of the IP Group in the Topology view of the Web interface.

Defines the type of IP Group

Enables the device to use the port indicated in the Request-URI of the incoming message as the destination port when routing the message to the IP Group.

Enables the IP Group to be used by a third-party routing server for call routing decisions.

Defines the shared username for authenticating the IP Group, when the device acts as an Authentication server.