show data dot11radio
This command displays status information about the MSBR router's wireless module.
Syntax
show data dot11radio
|
Command |
Description |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
associations {all|interface|stats interface} |
Displays the stations associated with this WiFi access point:
|
|||||||||
|
channel |
Displays information about the current WiFi channel. |
|||||||||
|
country-code |
Displays the WiFi country code. |
|||||||||
|
hardware-stats |
Displays statistics about the WiFi hardware. |
|||||||||
|
interface |
Displays information according to Wi-Fi interface ID. |
|||||||||
|
other-ap |
Displays other Wi-Fi access points (APs) in the range. |
Command Mode
Basic User and Privileged User
Example
This example displays information about the current WiFi channel:
show data dot11radio channel Channel configured auto. Current channel is 1 Width 20
This example displays information about Wi-Fi interface ID 1:
show data dot11radio interface 1 dot11radio 1 is Disabled. Description: LAN Wireless 802.11n Access Point bridge-group 1 State Time: 91:02:49 Time since creation: 91:02:49 mtu auto (current value 1500) network lan ssid MSBR broadcast security mode NONE no security mac mode mode ngb channel width 40/20 channel auto power 100 beacon dtim-period 1 beacon period 100 fragment threshold 2346 cts mode none cts type cts burst num 3 burst time 2 rts threshold 2346 wmm country code 0x178 (376) DNS is configured dynamic IPv6 is disabled rx_packets 0 rx_bytes 0 tx_packets 0 tx_bytes 0 Device debug: state Connected clients: -1 Global TX power limit: 24dBm 15-seconds input rate: 0 bits/sec, 0 packets/sec 15-seconds output rate: 0 bits/sec, 0 packets/sec 5-minutes input rate: 0 bits/sec, 0 packets/sec 5-minutes output rate: 0 bits/sec, 0 packets/sec