show data f-path rate

This command displays throughput counters of traffic using fast-path or full-path.

Syntax

show data f-path rate [refreshing]

Command	Description
show data f-path rate	Displays throughput counters of traffic using fast-path or full-path.
show data f-path rate refreshing	Displays throughput counters of traffic using fast-path or full-path, and refreshes the output every three seconds until the CTRL+C keys are pressed.

Command Mode

Basic User and Privileged User

Example

This example displays the output of the command:

# sh data f-path rate refreshing
 15-seconds Fastpath rate: 430 pps, 0 bps
 5-minutes Fastpath rate: 445 pps, 0 bps
 15-seconds fullpath rate: 475 pps, 1476 Kbps
 5-minutes fullpath rate: 460 pps, 1494 Kbps